There are various ardunio uno based boards, sensors,shields,project parts for beginners to professional maker.

0.96 Inch OLED Display 6-Pin 128X64
0.96 Inch O LED Display 6-Pin 128X64

0.96 Inch O LED Display 6-Pin 128X64 has following features OLED Driver IC: SSD1306 Colour: Blue Resolution: 128 x 64 Visual Angle: >160° Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Mini Size: 2.7 x 2.8cm Only Need … Continued

not rated 370.00 + GST Add to basket
0.96 OLED Display 4 Pin 128x64 I2C Arduino
0.96 OLED Display 4 Pin 128×64 I2C Arduino

Tiny 128×64 is a OLED Display based on SSD1306 Display controller chip. The display is mounted on an easy to solder PCB. The SSD1306 Display interfaces to microcontrollers through a I2C serial bus interface. OLED Technology, Self-luminous, need no back-light (consumes less energy) High resolution: … Continued

not rated 350.00 + GST Add to basket
0.96" IIC/SPI Serial 128x64 OLED Display Module-7Pin
0.96″ IIC/SPI Serial 128×64 OLED Display Module-7Pin

Driver chip of OLED module: SSD1306 Viewing angle: > 160 degrees Connector: 7-pin Power voltage: 3-5V Supports many control chips: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Pin map: GND: Ground VCC: Voltage at the … Continued

not rated 350.00 + GST Add to basket
https://www.deltakit.net/wp-admin/post.php?post=1061&action=edit
2.4 Inch TFT Touch Screen LCD Shield For Arduino
This Arduino LCD display shield with built in microSD card connection. This TFT display is big (2.4″ diagonal) bright and colorful different  240×320 pixels with individual pixel control. It has way more resolution than a black and white 128×64 display.
not rated 400.00 + GST Add to basket
3.5" Touch LCD Shield For Arduino Uno-Mega
3.5″ Touch LCD Shield For Arduino Uno-Mega

This simple 3.5″ TFT LCD shield with 8-bit parallel interface for Arduino Uno and Arduino Mega offers a resolution of 320×480. Resistive touch screen TFT LCD, 3.5inch, 480×320 resolution Onboard stand-alone touch controller, better touching than solutions that use AD … Continued

not rated 1,500.00 + GST Add to basket
3.7V 1600mAh LiPo Rechargeable Battery
3.7V 1600mAh LiPo Rechargeable Battery
This 3.7V 1600mAh LiPo Rechargeable Battery is really the latest state of the art technology in rechargeable. It is extremely thin, light weight and super thin compared to any rechargeable chemistry.Low weight, small size but huge capacity.The other advantage of the Lithium Polymer technology is the very low self discharge .
not rated 350.00 + GST Add to basket
RAMPS 1.4 Reprap 3D Printer Arduino Mega Shield (RAMPS)
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model it is mainly designed for the purpose of using pololu stepper driven board (similar to 4988 driven board). RAMPS can only work when connected to its mother board Mega 2560 and 4988/DRV8825. Owning to its stability in operation and great compatibility with most 3D printer.
not rated 350.00 + GST Add to basket
4 AA Cell Battery Holder
4 AA Cell Battery Holder

4 AA Cell Battery Holder for 4 x 1.5V batteries with wire leads. Provides a total of 6V with 4 cells in series. Specifications: Material: Plastic Color: Black Size: approx. 77x 81 x 21mm(Not count the wire length) Net weight: … Continued

not rated 40.00 + GST Add to basket
4 Digit TM1637 Clock Display Module For Arduino
4 Digit TM1637 Clock Display Module For Arduino

This is TM1637 Based Serial 8-Digit 7 Segment LED Display Module. Also Called LED Tube Display. It has an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 4 digit 7-segment digital LED display. Features: A convenient four-wire serial interface … Continued

not rated 220.00 + GST Add to basket
4-Way Infrared Tracking Obstacle Avoidance Sensor Module
4-Way Infrared Tracking Obstacle Avoidance Sensor Module

4-Way Infrared Tracking Obstacle Avoidance Sensor Module. Every road of the infrared transmitting tube continuously launch infrared sensor, the infrared ray is emitted when the intensity of reflected back has not been reflected or but is not big enough, the … Continued

not rated 250.00 + GST Add to basket
8-Bit Digital LED TM1638 Key Display Module for Arduino
8-Bit Digital LED TM1638 Key Display Module For Arduino
8-Bit Digital LED TM1638 Key Display Module for Arduino is a seven segment display module with 8 numeric characters, complete with 8 LED indicators and 8 tact switch / push button, with TM1638 controller IC, very useful as a user input / output module for your minsys (suitable for Arduino, Raspberry pi, etc.) Specifications: Including the following resources: 1. 8 key2. 8 common paint LEDs
not rated 180.00 + GST Add to basket
A7 GSM GPRS GPS 3 In 1 Module Shield Support Voice Message
A7 GSM GPRS GPS 3 In 1 Module Shield Support Voice Message

A7 GSM GPRS GPS 3 In 1 Module Shield Support Voice Message , which is use the newest A7 GSM/GPRS/GPS module , A7 module is a GSM/GPRS/GPS function module.It supports GSM/GPRS Quad-Band( 850/900/1800/190) network. Also, it supports voice calls,SMS messages,GPRS … Continued

not rated 2,200.00 + GST Add to basket
ACS712 5A Current sensor
ACS712 30A Current Sensor

ACS712 30A Current Sensor has following features Supply Voltage (VCC)- 5V DC Measurement Range -30 to +30 Amps Scale Factor 185 mV per Amp Chip ACS712ELC-30A On board power indicator

not rated 165.00 + GST Add to basket
ACS712 5A Current sensor
ACS712 5A Current sensor

ACS712 5A Current sensor 5A range Current Sensor Module ACS712  consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a … Continued

not rated 165.00 + GST Add to basket
ADS1115 16-Bit ADC - 4 CH with Programmable Gain Amplifier
ADS1115 16-Bit ADC – 4 CH with Programmable Gain Amplifier

A Breakout Board  for ADS1115 16-Bit ADC – 4 Channel with Programmable Gain Amplifier. The ADS1115 provides 16-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a … Continued

not rated 350.00 + GST Add to basket
ADXL335 3-Axis Accelerometer
ADXL335 3-Axis Accelerometer

On the earth, 1g means acceleration of 9.8 m/s2 is present. On moon, it is 1/6th of earth and on mars it is 1/3rd of earth. Accelerometer can be used for tilt-sensing applications as well as dynamic acceleration resulting from … Continued

not rated 275.00 + GST Add to basket
ADXL345 IIC / SPI Digital Tilt Sensor Accelerometer
ADXL345 IIC / SPI Digital Tilt Sensor Accelerometer
The ADXL345 IIC / SPI Digital Tilt Sensor Accelerometer is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital output data is formatted as 16-bit too complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.
not rated 250.00 + GST Add to basket
All In One Shield Kit With Ardunio
All In One Shield Kit With Arduino
All In One Shield Kit With Arduino all prototype shield includes LCD Keypad Shield, Ethernet Shield, Joystick Shield, Motor Shield and Protoshield with Breadboard for complex, advance learning, and prototyping.
not rated 1,780.00 + GST Add to basket
APDS-9930 RGB Infrared Gesture Sensor
APDS-9930 RGB Infrared Gesture Sensor
The APDS-9930 sensor is an all-in-one chip, which can measure light, gestures and distance. The distance detection works up to about 100mm, this chip is often used in phones to lock / dim the screen when the phone is held against the ear. Furthermore, the light intensity can be measured and 'calculated' the module gestures such as swiping to the left, right, up and down.
not rated 250.00 + GST Add to basket
37 in 1 Sensor kit for Arduino
Arduino 37 In 1 Sensor Kit Set
Infrared sensor receiving module.Laser sensor module.Temperature and humidity sensor module.Infrared sensor module.5v relay module.Obstacle avoidance sensor module
not rated 1,100.00 + GST Add to basket