various type of boards for your project need.
- You cannot add "STM32 Cortex-M4 STM32F407VET6 Development Board" to the basket because the product is out of stock.
Showing 1–20 of 28 results
8-Bit Digital LED TM1638 Key Display Module For Arduino
Rated 0 out of 5
0 Reviews
8-Bit Digital LED TM1638 Key Display Module for Arduino is a seven segment display module with 8 numeric characters, complete with 8 LED indicators and 8 tact switch / push button, with TM1638 controller IC, very useful as a user input / output module for your minsys (suitable for Arduino, Raspberry pi, etc.) Specifications: Including the following resources: 1. 8 key2. 8 common paint LEDs
Arduino Leonardo With ATmega32u4
Rated 0 out of 5
0 Reviews
The Arduino Leonardo with ATmega32u4 is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button.
Arduino Mega 2560 ADK With Cable
Rated 0 out of 5
0 Reviews
The Mega R3 Android Accessory Development Kit (ADK) + USB Cable is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC.It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button.
Arduino Mega 2560 R3 Board
Rated 0 out of 5
0 Reviews
This board is based on and fully compatible with Arduino Mega 2560 R3. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button
Arduino Nano Board R3 With CH340 Chip Soldered Pins
Rated 0 out of 5
0 Reviews| Warranty | None |
| Shipping | Same day |
| Discount | Available Quantity Discount |
Arduino Nano R3 Board
Rated 0 out of 5
0 Reviews
Micro controller is atmega328, operating voltage (logic level)5 v;input voltage 7-12 v;input voltage) limits) 6-20v;digital i/o pins 14 (of which 6 provide pwm output);analog input pins 8;dc current per i/o pin 40 ma;flash memory 32 kb (atmega328) of which 2 kb used by boot loader;ram 2 KB (atmega328);eeprom 1 kb (atmega328);clock speed 16 mhz.
Arduino Pro Micro ATmega32U4 5V 16MHZ Board
Rated 0 out of 5
0 Reviews
This Pro Micro 5V 16M Mini Leonardo Micro-controller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like.
Arduino Pro Mini 328-5V/16MHz
Rated 0 out of 5
0 Reviews
Arduino Pro Mini board is more suitable for applications and installations where space is premium and projects are made as permanent set ups. This board is a 5 V version, powered by ATmega328. Power The Adraxx Pro Mini can be powered with an FTDI cable or breakout board connected to its six pin header, or with a regulated 5V supply on the Vcc pin.
Arduino Uno R3 Board Generic
Rated 0 out of 5
0 Reviews
The Arduino Uno R3 compatible ATmega328P is a micro controller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
Arduino UNO R3 SMD Board With Connector
Rated 0 out of 5
0 Reviews- Microcontroller ATmega328 (SMD) – Interface CH340G
- Input Voltage (recommended): 7-12V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
ARM Cortex M3 Development Board STM32F103RBT6
Rated 0 out of 5
0 Reviews
This is a good start-up board for learning the new ST Cortex-M3 based microcontrollers STM32F103RBT6. The headers with all microcontrollers port output allows you to easily implement your own experiments and add-ons.
Due R3 ARM CORTEX-M3 Control Board
Rated 5.00 out of 5
(5.00)4 Reviews
The Due R3 ARM CORTEX-M3 Control Board is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
ESP WROOM 32/ ESP32 WiFi-BT-BLE MCU Module
Rated 0 out of 5
0 Reviews- Hybrid module with Wi-FI & Bluetooth.
- High level of integration.
- Ultra-low power management.
- 4 MB Flash.
- Current – Receiving: 80 mA.
- Supply Voltage: 2.2 V ~ 3.6 V.
- Data Rate: 54 Mbps.
- Frequency: 2.4 GHz.
ESP-EYE ESP32 Wi-Fi and Bluetooth AI Development Board
Rated 5.00 out of 5
(5.00)1 Review
ESP-EYE is a development board for image recognition and audio processing, which can be used in various AIoT applications. It features an ESP32 chip, a 2-Megapixel camera and a microphone. ESP-EYE offers plenty of storage, with an 8 Mbyte PSRAM and a 4 Mbyte flash. It also supports image transmission via Wi-Fi and debugging through a Micro-USB port.
I2C 1602 Serial LCD Module Display For Arduino UNO-MEGA
Rated 0 out of 5
0 Reviews
IC/I2C Interface Adapter Module is used for 16×2 LCD Display.It uses the PCF8574T IC chip which converts I2C serial data to parallel data for the LCD display.Also this interface module simplifies connecting an Arduino to a 16×2 Liquid Crystal display using only 4 wires.
Lilypad Arduino 328 Main Board
Rated 0 out of 5
0 Reviews
This is LilyPad Arduino - the main board consisting of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. Board will run from 2V to 5V.
LilyTiny LilyPad Micro USB ATtiny85 Wearable Module
Rated 0 out of 5
0 Reviews- 8K Byte of In-System Programmable Program Memory Flash
- 512 Bytes In-System Programmable EEPROM
- 512 Bytes Internal SRAM
- Diameter:25mm