View basket “Digital Audio Amplifier Board Module-PAM8403” has been added to your basket.
Showing 1–20 of 26 results
1.3 Inch 128×64 OLED Display Module with SPI Serial Interface-7 Pin
Rated 0 out of 5
0 Reviews
10W/15W/20W Stereo Bluetooth Amplifier Board XY-P15W
Rated 0 out of 5
0 Reviews- Bluetooth Power Amplifier Module:
- Output: Daul Channel
- Voltage: DC 8V-24V
- Communication Range: 15m
2CH. PWM Duty Cycle Square Wave Rectangular Wave Signal Generator
Rated 0 out of 5
0 Reviews- Operating Voltage: 5-30V, support micro USB 5.0V power supply
- Frequency Range: 1Hz-150KHz@2%
- Signal Load Capacity: output current is within 8–30mA
- Output Range: default 5V V-pp (can be changed by external power)
5V Active Alarm Buzzer Module For Arduino
Rated 0 out of 5
0 Reviews- Bring Oscillation Source
- It and your Arduino or Development board will be able to play melodies.
- It creates different sound based on different frequency of I/O toggling.
AMS1117 3.3V Power Supply Module
Rated 0 out of 5
0 Reviews- Input: DC 4.5V – 12V (input voltage must be more than output voltage (more than 1V))
- Output: 3.3V, 800mA (load current cannot exceed 800ma)
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Small Compact Size, 4Pin Type, Breadboard Friendly.
- Dual-panel design, the layout is nice
AMS1117 5V Step-Down Power Supply Module
Rated 0 out of 5
0 Reviews
Input: DC 6.5V – 12V (input voltage must be more than output voltage (more than 1V)), Output: 5.0V (+-0.05v error), 800mA (load current cannot exceed 800mA), On-board AMS1117 chip., On-board power indicator to indicate power is turned on: Red LED. Small Compact Size, 4Pin Type, Breadboard Friendly. Dual-panel design, the layout is nice
CD74HC4067 High Speed CMOS 16-Channel A/D Multiplexer Breakout Module
Rated 0 out of 5
0 Reviews
2V to 6V operation, “On” resistance: 70 Ohms @ 4.5V, 6ns break-before-make @ 4.5V, Wide operating temperature range: -55C to 125C
DC-DC Buck Adjustable Power Module XL4015 5A
Rated 0 out of 5
0 Reviews- Input voltage range：4～38VDC(Note:input voltage not exceeding 38V)
- Output voltage range：1.25-36VDC adjustable
- Output current: 0-5A
- Output power: 75W
Digital Thermostat Temperature Control Relay Module-XHW1209
Rated 0 out of 5
0 Reviews- Programmable mini digital temperature control unit with -50℃ -110℃(-58℉-230℉) measuring range
- Power consumption: Static current ≤35MA pull current: ≤65MA
- Display Type: 0.28 inch, three digital
- Measuring input: NTC (10K0.5%) Waterproof sensor
- Input power: DC12V
- Temperature measurement accuracy: 0.1 ℃
- Temperature input: NTC (10K 0.5%) waterproof temperature sensor
FR120N Isolation MOSFET MOS Tube FET Module PWM Relay Switch
Rated 0 out of 5
0 Reviews- FR120N Isolation MOSFET MOS Tube : 100V 9.4A
IRF520 MOSFET Driver Module For Arduino ARM Raspberry pi
Rated 0 out of 5
0 Reviews
For Arduino drive up to 24V allows the load, such as LED lights, DC motors, miniature pumps, solenoid valves
PWM dimming LED can be used to achieve stepless dimming, variable speed motor
LM386 Based 20 Multiplier Gain Audio Amplifier Module
Rated 0 out of 5
0 Reviews
The LM386 is an audio amplifier designed for use in low voltage consumer applications.
MAX3232 RS232 To TTL Converter Module Board-2pcs.
Rated 0 out of 5
0 Reviews- High speed, replaceable MAX232 based. The device fitted supports up to 120kbps
- Supports microcontroller UARTs – 5V TTL signal levels.
- Small PCB footprint of 50´40mm
- Very low power consumption
MAX490 RS422 Bidirectional Full Duplex Two-Way TTL Signal Conversion Module
Rated 0 out of 5
0 Reviews
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
Rated 0 out of 5
0 Reviews
This is MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino with this module, you will easy to control any CAN Bus device by SPI interface with your MCU, such as Arduino UNO and Compatible with Arduino based micro-controller projects.
MP1584 DC-DC 3A Adjustable Buck Module
Rated 0 out of 5
0 Reviews
Input Voltage: 4.5V – 28V ,Output Voltage: 0.8V – 20V, Output Voltage Adjustment: On-board potentiometer, Output Current: 1.8A (typical), 3.0A (max)., Ceramic Capacitor Stable, Internal Soft-Start, Internally Set Current Limit without a Current Sensing Resistor
Multi-Function Delay Timer Module Switch Control Relay Cycle Timer
Rated 0 out of 5
0 Reviews- Operating voltage: 6 - 30V DC
- 1 Channel delay trigerred relay module
- Delay time: 0.1 second ~ 999 minutes
- Seven Segment Display