Different types of Servo motors used for robotic applications like Robotic arm, pick & place robot.

Futaba S3003 Servo Motor-180 Degree
Futaba S3003 Servo Motor-180 Degree

Futaba S3003 Servo Motor-180 Degree Control System: +Pulse Width Control 1520 usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C Operating Speed (4.8V): 0.23sec/60 degrees at … Continued

not rated 330.00 + GST Read more
Futaba S3003 Servo Motor-360 Degree
Futaba S3003 Servo Motor-360 Degree
  • Torque - 4.8V: 3.2 Kg-cm 6.0V: 4.1 Kg-cm
  • Speed - 4.8V: 023 Sec/ 60 deg 6.0V: 019 Sec/ 60
  • Weight: 37 g
  • Gear Type: Plastic
not rated 280.00 + GST Add to basket
High Torque Servo CYS-S8218 Digital Metal Gear 40KG
High Torque Servo CYS-S8218 Digital Metal Gear 40KG

This High Torque Servo CYS-S8218 Digital Metal Gear 40KG is used in industrial & for professional use. Easy to install Made of aluminum alloy material Stall torque of 36 kg.cm(6.0V), 38kg.cm (7.4V) High precision metal gear Suit for 1/5 RC … Continued

not rated 2,100.00 + GST Add to basket
Metal Gear Servo Motor MG995
Metal Gear Servo Motor MG995-180º

Metal Gear Servo Motor MG995-180º Product Size: 40.7 * 19.7 * 42.9mm. Product weight: 55g. Operating torque: 13KG/cm. Reaction speed: 53-62R / M. Operating Temperature:-30 ~ +60 °. Deadband settings: 4 microseconds. Plug Type: JR, FUTABA General. Rotation angle: A … Continued

not rated 350.00 + GST Add to basket
MG996R Metal Gear Servo Motor
MG996R Metal Gear Digital High Torque Servo
High value, general purpose, standard size servo with high torque. Easily used with the Arduino Servo library.
not rated 350.00 + GST Add to basket
MULTIPURPOSE ALUMINIUM STANDARD SERVO BRACKET
Multipurpose Aluminium Standard Servo Bracket
This is Aluminum Multi-Purpose Servo Bracket without screws and fitting. It is high quality and works great for making multi-axis joints for use in robot arms and legs. The bracket fits standard size servo motors.
not rated 120.00 + GST Add to basket
Pan Tilt Camera Mount - 2 Axis with Servos 9G DIY
Pan Tilt Camera Mount – 2 Axis With Servos 9G DIY

Pan Tilt Camera Mount – 2 Axis with Servos 9G DIY is a servo based 2 axis pan and tilt mechanism for mounting wireless/ wired camera and sensors on your robots. Panning , rolling and tilting is achieved by controlling … Continued

not rated 299.00 + GST Add to basket
CJMCU-PCA9685 16 Channel PWM Servo Control Module 12 Bit I2C
PCA9685 16-CH. PWM Servo Control Module 12 Bit I2C

PCA9685 16-CH. Servo Control PCA9685 16-CH. Servo Control Features : 1MHz Fast-mode Plus compatible owned 30mA high drive capability on SDA of I2C bus interface to drive highly capacitive bus – Each LED output can be achieved from the fully … Continued

not rated 240.00 + GST Add to basket
PCA9685 16 CHANNEL 12 BIT PWM SERVO MOTOR DRIVER
PCA9685 16-Channel 12 BIT PWM Servo Motor Driver
PCA9685 16 Channel 12 BIT PWM Servo Motor Driver is used  to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that your microcontroller has a limited number of PWM outputs!
not rated 250.00 + GST Add to basket
16-CH. 12-bit PWM/Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi
Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi-16CH.-12Bit
This 16-CH. 12-bit PWM/Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi uses I2C 7-bit address between 0x60-0x80, selectable with jumpers.Terminal block for power input (or you can use the 0.1" breakouts on the side).Reverse polarity protection on the terminal block input.3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header
not rated 300.00 + GST Add to basket
Servo Extension Cable-30cm - Male To Female
Servo Extension Cable-30cm – Male To Female

Servo Extension Cable-30cm – Male To Female This is a 12 inch Servo Extension with J Connectors. On one end of the wire is a male “J” connector and on the other end of the wire is a female “J” … Continued

not rated 30.00 + GST Add to basket
Servo Motor VTS08A GS-4060BB
Servo Motor VTS08A GS-4060BB

Servo Motor VTS08A GS-4060BB Model:GS-4060BB Operating Voltage : 4.8V ~ 6.0V Idle current:200mA at 4.8V ,250mA at 6V Operating speed: 0.16 sec/60 @ 4.8V,0.19 sec/60 @ 6V Stall torque: > 6.3 kg-cm  4.8V,7kg-cm at 6V Weight: 40 g Size: 40.8*20.1*38.0mm Connector wire … Continued

not rated 350.00 + GST Add to basket
Servo Mount Holder Bracket For SG90 MG90
Servo Mount Holder Bracket For SG90/MG90
Servo Bracket holder for the SG90 Micro 9g Servo. It comes complete with the screws. Perfect fitting for Micro servo 9g/SG90.Acrylic 9G Servo Bracket.
not rated 40.00 + GST Add to basket
Servo Tester / ESC Consistency Tester / PPM Generator
Servo Tester / ESC Consistency Tester / PPM Generator

This Servo Tester device can be used as as signal generator for electric speed controller (ESC). You can test your motor system without using transmitter and receiver. Servo Tester has 3 modes to check or ESC: Manual Mode: turn the … Continued

not rated 125.00 + GST Add to basket
Tower Pro SG90 9g Servo Motor
Tower Pro SG90 9g Servo Motor

The Tower Pro SG90 9g Servo Motor is one of the most popular 9g servo in the world. The Tower Pro SG90 9g Servo motor is 180° rotation servo. It is a Digital Servo Motor which receives and processes PWM signal faster … Continued

not rated 120.00 + GST Add to basket
Towerpro MG90S Mini Digital Servo 2.2kg / 0.08sec / 13g
Towerpro MG90S Mini Digital Servo 2.2kg / 0.08sec / 13g
The Micro Servo MG90S is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The MG90S micro servo with accessories is perfect for R/C helicopter, plane, car, boat and truck use.
  • Model: MG90S
  • Weight: 13 gm
  • Operating voltage: 4.8V~ 6.6V
  • Servo Plug: JR
  • Stall torque @4.8V : 1.8kg-cm
  • Stall torque @6.6V : 2.2kg-cm
not rated 200.00 + GST Add to basket
TowerPro MG995 – Continuous Rotation 360° Metal Gear Servo Motor
TowerPro MG995 – Continuous Rotation 360° Metal Gear Servo Motor

It has metal gears which makes it robust and reliable motors. These TowerPro MG995 – Continuous Rotation 360° Metal Gear Servo Motor are the high-speed servo motors with the mighty torque of 9.4 kg/cm. The optimized performance and reliability of … Continued

not rated 380.00 + GST Add to basket