Different types of Servo motors used for robotic applications like Robotic arm, pick & place robot.

Showing 1–20 of 24 results

Sort by
Show

20Kg High Torque Waterproof Digital Metal Gear Servo

0 Reviews
1,652.00
  • Description : 20Kg waterproof servo for 1/10 RC car steering
  • Size : 55*20*43MM
  • Torque : 18Kg.cm ~ 20Kg.cm
  • Speed : 0.13sec ~ 0.11sec/60 degree
  • Voltage : 6.0Volts ~7.4Volts dc

25Kg High Torque Digital Metal Gear Servo

0 Reviews
1,652.00
  • Voltage Range (VDC):  4V-8.4V
  • Rated Torque: 25Kg.cm @ 7.4V
  • Gears Type: Steel Metal
  • Connector: JR
  • Command Signal: PWM
  • Size (L x W x H) mm: 55 x 20 x 43

30KG Serial Bus Servo Waveshare

0 Reviews
2,832.00
  • Model: ST3215 serial bus servo
  • Operating voltage: 6 – 12V
  • Mechanical limited  angle: No Limit
  • POS sensor resolution: 180° / 1024
  • Idling speed: 0.18sec / 60°@4.8V 0.16sec / 60°@6V
  • Baud-rate:  38400bps – 1Mbps

35.5Kg High Torque Digital Metal Gear Servo

0 Reviews
2,124.00
  • Voltage Range (VDC):  4V-7.4V
  • Rated Torque: 35Kg.cm @ 7.4V
  • Gears Type: Steel Metal
  • Connector: JR
  • Command Signal: PWM
  • Size (L x W x H) mm: 55 x 20 x 43

Aluminum Servo Arm Round Disk Type 25T -2 Pcs

0 Reviews
118.00
  • Material:  Aluminum
  • M3 Screws -4Pcs
  • Adjustable type servo arm
  • Mounting Hole Spacing: 14mm
  • Servo disc diameter: 20mm
  • 25Tooth

Aluminum Steering Servo Horn Arm For Futaba Standard 25T

0 Reviews
118.00
It is adjustable RC rocker for RC planes servo motors. Aluminum Hole centers at 20 and 24mm from the servo output 25T spine for RC Plane. It includes two steel bolt to secure the split clamp onto servo output.

MG996R Metal Gear Digital High Torque Servo

0 Reviews
413.00
High value, general purpose, standard size servo with high torque. Easily used with the Arduino Servo library.

Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi-16CH.-12Bit

0 Reviews
472.00
This 16-CH. 12-bit PWM/Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi uses I2C 7-bit address between 0x60-0x80, selectable with jumpers.Terminal block for power input (or you can use the 0.1" breakouts on the side).Reverse polarity protection on the terminal block input.3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header

Servo Mount Holder Bracket For SG90/MG90 - 2Pcs

0 Reviews
118.00
Servo Bracket holder for the SG90 Micro 9g Servo. It comes complete with the screws. Perfect fitting for Micro servo 9g/SG90.Acrylic 9G Servo Bracket.

Towerpro MG90S Mini Digital Servo 2.2kg / 0.08sec / 13g

0 Reviews
295.00
The Micro Servo MG90S is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The MG90S micro servo with accessories is perfect for R/C helicopter, plane, car, boat and truck use.
  • Model: MG90S
  • Weight: 13 gm
  • Operating voltage: 4.8V~ 6.6V
  • Servo Plug: JR
  • Stall torque @4.8V : 1.8kg-cm
  • Stall torque @6.6V : 2.2kg-cm
Back to Top
Product has been added to your cart

Fatal error: Uncaught wfWAFStorageFileException: Unable to verify temporary file contents for atomic writing. in /home/deltakit/public_html/wp-content/plugins/wordfence/vendor/wordfence/wf-waf/src/lib/storage/file.php:51 Stack trace: #0 /home/deltakit/public_html/wp-content/plugins/wordfence/vendor/wordfence/wf-waf/src/lib/storage/file.php(658): wfWAFStorageFile::atomicFilePutContents('/home/deltakit/...', '<?php exit('Acc...') #1 [internal function]: wfWAFStorageFile->saveConfig('livewaf') #2 {main} thrown in /home/deltakit/public_html/wp-content/plugins/wordfence/vendor/wordfence/wf-waf/src/lib/storage/file.php on line 51