Motor Drivers Archives - Deltakit -Electronic Parts-Robotic Parts-Sensors-3D printer parts

Motor Drivers circuits are current amplifiers. They act as a bridge between the controller and the motor in a motor drive. Motor drivers are made from discrete components which are integrated inside an IC. The input to the motor driver IC or motor driver circuit is a low current signal.

You cannot add "TB6612FNG Ultra Small Motor Driver Module 1.2A" to the basket because the product is out of stock.

Showing all 20 results

20A PWM DC Motor Speed Regulator Module 9V-60Vdc

Rated 0 out of 5

0 Reviews

₹500.00

A4988 Stepper Motor Driver With Heatsink

Rated 0 out of 5

0 Reviews

₹100.00

BTS7960 43A H-Bridge High-Power Driver Module

Rated 0 out of 5

0 Reviews

₹500.00

BTS7960 High Power driver module comes with output Voltage indication of motor driver output end with heat sink solder. Output current is infinitely adjustable to meet various applications. BTS7960 Power driver large current (43 A) H bridge driver and 5V isolate with MCU, and effectively protect MCU.

DRV8825 Stepper Motor Driver With Heatsink

Rated 0 out of 5

0 Reviews

₹100.00

DRV8833 2-Channel DC Motor Driver Module

Rated 0 out of 5

0 Reviews

₹100.00

Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
Operating voltage: 2.7‌‌ V to 10.8 V
Output current: 1.2 A continuous (2 A peak) per motor
Inputs are 3V- and 5V-compatible

Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A)

Rated 0 out of 5

0 Reviews

₹2,500.00

Voltage Max: 16V, Maximum current rating: 30 A, Practical Continuous Current: 14 A, Current sensing available to Arduino analog pin, MOSFET on-resistance: 19 mΩ (per leg),Maximum PWM frequency: 20 kHz, Thermal Shutdown, Under voltage and Over voltage shutdown.

Sold out

L293D Motor Driver Board

Rated 0 out of 5

0 Reviews

₹100.00

L298 Motor Driver Board

Rated 0 out of 5

0 Reviews

₹150.00

L9110S 2CH H-bridge Stepper Motor Dual DC Motor Controller Board

Rated 0 out of 5

0 Reviews

₹100.00

The L9110S Dual Channel Motor Driver Module is a compact board that can be used to drive very small robots.

Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)

Rated 0 out of 5

0 Reviews

₹1,500.00

Voltage Max: 16V
Maximum current rating: 30 A
Practical Continuous Current: 14 A
Current sensing available to Arduino analog pin
Thermal Shutdown
Under voltage and Over voltage shutdown

Motor Drive Board L293D Module For Arduino UNO MEGA 2560

Rated 0 out of 5

0 Reviews

₹100.00

New L293D motor shield, the input voltage DC4.5-25V
600mA output current capability per channel

PWM DC Motor Speed Controller Module 6V/12V/24V/28V 3A 1203B

Rated 0 out of 5

0 Reviews

₹100.00

PWM DC Motor Speed Controller 12V-40V 10A

Rated 0 out of 5

0 Reviews

₹250.00

PWM Speed Controller Module-DC 5V To DC 35V 5A 90W

Rated 0 out of 5

0 Reviews

₹100.00

16-CH. 12-bit PWM/Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi

Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi-16CH.-12Bit

Rated 0 out of 5

0 Reviews

₹400.00

This 16-CH. 12-bit PWM/Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi uses I2C 7-bit address between 0x60-0x80, selectable with jumpers.Terminal block for power input (or you can use the 0.1" breakouts on the side).Reverse polarity protection on the terminal block input.3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header

Stepper Motor Driver TB6600 Subdivision 4.0A 42V

Rated 0 out of 5

0 Reviews

₹500.00

TB6600 stepper motor driver provides maximum 4.0A output current. TB6600 comes with output sort-circuit protection, Low-Pressure shut-off, Overheating parking and over-current protection.

TB6560 Driver Board 3A CNC Router Single Axis Controller Stepper Motor

Rated 0 out of 5

0 Reviews

₹500.00

CNC Router Single Axis 3A Stepper Motor driver TB6560 board is for axis control with Input signal high-speed opto-coupler isolation, large heat sink to ensure good heat dissipation. Stepper motor driver is Semi-flow mode adjustable, semi-flow current adjustable,with a variety of semi-flow model and semi-flow current setting functions

TB6600 4.5A CNC Single-Axis Stepper Motor Driver Board Controller

Rated 0 out of 5

0 Reviews

₹600.00

Toshiba's new high current, high voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short-circuit protection and increased compared to TB6560.

Sold out

TB6612FNG Ultra Small Motor Driver Module 1.2A

Rated 0 out of 5

0 Reviews

₹200.00

The Motor Driver TB6612FNG Module motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes – CW, CCW, short-brake, and stop.

ULN2003 Stepper Motor Driver

Rated 0 out of 5

0 Reviews

₹100.00

Menu