Various types of Stepper motor used for Engineering projects & robotic applications

5V Unipolar Stepper motor (28BYJ-48-5V)
5V Unipolar Stepper motor (28BYJ-48-5V)

5V Unipolar Stepper motor (28BYJ-48-5V) Unipolar stepper with 0.1″ spaced 5-pin cable connector 8 steps per revolution and 1/64 geared down reduction Holding torque: 2 oz-force*in Shaft: 5mm diameter flattened  Diameter: 28mm Voltage: 5V No-load pull into the frequency: >600Hz … Continued

not rated 120.00 + GST Add to basket
A4988 Stepper Driver With Heatsink
A4988 Stepper Driver With Heatsink

This A4988 Stepper Driver With Heatsink is used to control stepper for various electronic project. A4988 IC can drive 2A per phrase of the stepper Simple step and direction control interface Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and … Continued

not rated 120.00 + GST Add to basket
DRV8825 Stepper Motor Driver With Heatsink
DRV8825 Stepper Motor Driver With Heatsink

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it … Continued

not rated 150.00 + GST Add to basket
EasyDriver Stepper Motor Driver A3967
Easy Driver Stepper Motor Driver A3967

The EasyDriver Stepper Motor Driver A3967 is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The … Continued

not rated 220.00 + GST Add to basket
L298 motor driver board
L298 Motor Driver Board

This L298 46V, 2A Stepper Motor / Dual DC Motor Driver module can drive bipolar stepper motor or Two DC motors at the same time. Each L298 has two H-Bridges. Each H-Bridge can supply 2Amp. current. L298 has heat sink … Continued

not rated 149.00 + GST Add to basket
L9110S 2-CH H-bridge Stepper Motor Dual DC Motor Controller Board
L9110S 2-CH H-bridge Stepper Motor Dual DC Motor Controller Board
The L9110S Dual Channel Motor Driver Module is a compact board that can be used to drive very small robots.
not rated 180.00 + GST Add to basket
Nema 17 4.2 Kg-cm Bipolar Stepper Motor CNC Robotics 3D Printer
Nema 17 4.2 Kg-cm Bipolar Stepper Motor CNC Robotics 3D Printer

The Nema 17 4.2 Kg-cm Bipolar Stepper Motor CNC Robotics 3D Printer is a stock motor that has a 5mm diameter shaft. It’s also great for all kinds of mechanical projects, robotics, and projects. It’s fully compatible with the Generation … Continued

Rated 4.00 out of 5
649.00 + GST Add to basket
NEMA 23 10.1 kg-cm Hybrid Stepper Motor
NEMA 23 10.1 kg-cm Hybrid Stepper Motor
  • Step Angle Step Angle: 1.8 °
  • Current: 2.8 A/Phase
  • Holding Torque: 101 N-cm
  • Detente torque: 3.6 N.cm (Maximum)
  • Lead Wires: 4
  • Shaft diameter: 6.35 mm
not rated 1,150.00 + GST Add to basket
NEMA 23 18.9 kg-cm Hybrid Stepper Motor
NEMA 23 18.9 kg-cm Hybrid Stepper Motor
Ideal Motor for CNC machines. Standard Nema23 frame size. 18.9Kgcm bipolar mode torque.
  1. Step Angle Step Angle: 1.8 °
  2. Current: 2.8 A/Phase
  3. Holding Torque: 189 N-cm
  4. Detent torque: 6.8 N.cm (Maximum)
  5. Lead Wires: 4
  6. Shaft diameter: 6.35 mm
not rated 1,699.00 + GST Add to basket
NEMA 23 7.2 kg-cm Dual Shaft Hybrid Stepper Motor
NEMA 23 7.2 kg-cm Dual Shaft Hybrid Stepper Motor
Step Angle Step Angle: 1.8 °, Current: 1 A/Phase, Holding Torque: 72 N-cm, Detente torque: 3.6 N.cm (Maximum), Lead Wires: 6, Shaft diameter: 6.35 mm (both sides)
not rated 1,199.00 + GST Add to basket
NEMA17 – KS42STH34-1504A Stepper Motor – 1.5A – 34mm
NEMA17 – KS42STH34-1504A Stepper Motor – 1.5A – 34mm
NEMA17 - KS42STH34-1504A Stepper Motor - 1.5A - 34mm is the most popular motors used to build 3D printers, milling machines, plotters and other electronically controlled devices
not rated 700.00 + GST Add to basket
NEMA17 – KS42STH40-1204A Stepper Motor – 1.2A – 40mm
NEMA17 – KS42STH40-1204A Stepper Motor – 1.2A – 40mm
NEMA17 – KS42STH40-1204A Stepper Motor – 1.2A – 40mm is a high quality 1.2A NEMA-17 precision stepper motor that is commonly used in 3D printers, CNC machines and other applications that require precise control.
not rated 720.00 + GST Add to basket
NEMA17 Stepper Motor 3KGCM With Pulley For 3D Printer
NEMA17 Stepper Motor 3KGCM With Pulley For 3D Printer

NEMA17 Stepper Motor 3KGCM With Pulley For 3D Printer is Ideal motor for 3D Printer. Standard NEMA 17 Frame size. 3kgcm with 2mm Pulley.  Features: Stepper motor with 2mm pulley attached to shaft compatible with GT2 timing belt Step Angle … Continued

not rated 500.00 + GST Add to basket
NEMA17 Stepper Motor-48mm – KS42STH48-1684A
NEMA17 Stepper Motor-48mm – KS42STH48-1684A
NEMA17 Stepper Motor-48mm – KS42STH48-1684A for high torque applications. Ideal Motor for ATM machines, 3D printers, Peristaltic pumps and job positioning and rotating applications. Standard NEMA 17 frame size.
not rated 850.00 + GST Add to basket
NEMA34 46 kg-cm Hybrid Stepper Motor
NEMA34 46 kg-cm Hybrid Stepper Motor
  1. Step Angle Step Angle: 1.8 °
  2. Current: 4 A/Phase
  3. Lead Wires: 4
  4. Shaft diameter: 14 mm
  5. Shaft Length : 32mm
 
not rated 3,900.00 + GST Add to basket
NEMA34 87 kg-cm Hybrid Stepper Motor
NEMA34 87 kg-cm Hybrid Stepper Motor
Ideal Motor for CNC machines and other machinery. Standard NEMA 34 frame size. 87Kgcm bipolar configuration motor. Works well with  Stepper Drive at 5Amp configuration.
  1. Step Angle Step Angle: 1.8 °
  2. Current: 5 A/Phase
  3. Holding Torque: 870 N-cm
  4. Lead Wires: 4
  5. Shaft diameter: 14 mm
not rated 6,499.00 + GST Add to basket
Stepper Motor Driver TB6600 Subdivision 4.0A 42V
Stepper Motor Driver TB6600 Subdivision 4.0A 42V
TB6600 stepper motor driver provides maximum 4.0A output current. TB6600 comes with output sort-circuit protection, Low-Pressure shut-off, Overheating parking and over-current protection.
not rated 750.00 + GST Add to basket
TB6560 Driver Board 3A CNC Router Single Axis Controller Stepper Motor
TB6560 Driver Board 3A CNC Router Single Axis Controller Stepper Motor
CNC Router Single Axis 3A Stepper Motor driver TB6560 board is for axis control with Input signal high-speed opto-coupler isolation, large heat sink to ensure good heat dissipation. Stepper motor driver is Semi-flow mode adjustable, semi-flow current adjustable,with a variety of semi-flow model and semi-flow current setting functions
not rated 490.00 + GST Add to basket
TB6600 4.5A CNC Single-Axis Stepper Motor Driver Board Controller
TB6600 4.5A CNC Single-Axis Stepper Motor Driver Board Controller
Toshiba's new high current, high voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short-circuit protection and increased compared to TB6560.
not rated 590.00 + GST Add to basket
ULN2003 Stepper motor driver
ULN2003 Stepper Motor Driver

  Use ULN2003 driver chip, 500mA  A. B. C. D LED indicating the four phase stepper motor working condition.  White jack is the four phase stepper motor standard jack.  Power pins are separated  We kept the rest pins of the … Continued

not rated 99.00 + GST Add to basket