Shop
Showing 761–780 of 1158 results
MQ-2 Gas And Smoke Sensor
MQ2 Gas And Smoke Sensor module is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen, smoke and so on. Based on its fast response time. measurements can be taken as soon as … Continued
MQ-2 Gas Sensor Module For Arduino & Raspberry pi
The MQ-2 Gas Sensor Module is designed to allow a microcontroller to determine when a preset carbon monoxide gas level has been reached or exceeded. Interfacing with the sensor module is done through a 4-pin SIP header and requires two … Continued
MQ-3 Alcohol Sensor Module
MQ3 Alcohol Sensor Module is suitable for detecting alcohol, this sensor can be used in a Breathalyser.It has a high sensitivity to alcohol and small sensitivity to Benzine. The sensitivity can be adjusted by the potentiometer. Power supply needs: 5V … Continued
MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module
MQ-5 Methane LPG Liquid Propane Gas Sensor Module
- Operating Voltage: 5V DC
- High sensitivity to LPG, natural gas, town gas.
- Small sensitivity to alcohol, smoke.
- Stable and long life.
- Simple drive circuit.
- Fast response.
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor Module
This is a simple-to-use MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm. This sensor has … Continued
MQ-7 Carbon Monoxide Coal Gas Sensor Module
MQ-8 Hydrogen Gas H2 Sensor Module
- Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
- The switching signal having a DO (TTL) output and analog output AO.
- TTL output valid signal is low. ( Low-level signal when the output light can directly connect to the microcontroller or relay module )
- The higher the voltage, the concentration of the analog output voltage is higher.
- A hydrogen gas detection with good sensitivity.
- Rapid response and recovery characteristics
MQ-9 Carbon Monoxide, Methane and LPG Gas Sensor Module
- Good sensitivity to CO/Combustible Gas
- High sensitivity to Methane, Propane, and CO
- Input voltage: DC 5±0.2V
- Current Consumption: 150mA
MSP430G2 LaunchPad Development kit
The MSP430G2 LaunchPad Development kit is an easy-to-use flash programmer and debugging tool that provides everything you need to start developing on MSP430 Value Line devices. The development kit includes a DIP socketed target board with integrated emulation to quickly … Continued
MT3608 2A DC-DC Step-Up Booster Power Module
- It’s efficient up to 93%
- It can source a good amount of current
- The maximum output current: 2A
- Input voltage: 2V-24V DC
- The maximum output voltage: 5V-28V DC
Multi-Function Delay Timer Module Switch Control Relay Cycle Timer
- Operating voltage: 6 - 30V DC
- 1 Channel delay trigerred relay module
- Delay time: 0.1 second ~ 999 minutes
- Seven Segment Display
Multi-Function Servo Motor Bracket Steering Head For MG995 MG996R
Multi-function Servo Motor Bracket Steering Head For MG995 MG996R The two-degree-of-freedom MG995 steering gear head is a small torque platform with high torque and high cost performance. It can perform two-degree-of-freedom movement in horizontal and vertical directions, which is convenient … Continued
Multi-Purpose Plastic Solenoid Valve HS15
Multi-purpose plastic Solenoid Valve HS15 Solenoid 3/4 “direct, 12V Power supply: 12V DC Power consumption: 5W Thread: G 3/4 “ Type: straight Connections: 6.3 mm faston Working pressure: 0.02 ~ 0.8MPa (0.2 ~ 8bar) Max. liquid temperature: 100 ° C … Continued
Multifunction Shield FOR Ardunio UNO / Leonardo
This Multifunction Shield FOR Ardunio UNO / Leonardo has a large range of features which makes it ideal for beginners who just want to experiment and learn, or just as a general purpose shield for more advanced uses. Besides the … Continued
Multipurpose Aluminium Standard Servo Bracket Black
This Multipurpose aluminium standard servo bracket black is compatible with TR Series Servo (TR205, TR213, TR223), Korea HS322, HS422, TowerPro MG995, MG996, SG5010 servos, Hitec, Parallax, Futaba, Fraser brand (size 40 × 20 × 36mm) standard servos. Aluminium Pan and … Continued
MY1016 250W eBike Motor With Electric Bicycle Combo Kit
MY1016Z3 24V 350W Geared DC eBike Motor With Electric Bicycle Combo Kit
- Model: MY1016Z3
- Voltage: 24 volts DC
- Power: 350 watt
- Speed (after Reduction): 324 RPM
- Torque: 11 N.m (110 kg.cm)
- Stall Torque: 55 N.m (550 kg.cm)
- Weight: 2.98 Kg.
- Current: 19.2 Amp Max.
MY1016Z3 350W Motor + Controller +Throttle – DIY Electric Bicycle Kit
This MY1016Z3 350W Motor + Controller +Throttle – DIY Electric Bicycle Kit includes a 24V 350W DC Geared motor and 24V E-bike controller and throttle designed to run motors up to 350 Watts. This full fledge combination of motor and controller is great for those wanting to … Continued
Nano 328P Expansion Adapter Breakout Board IO Shield
- Compatible with Arduino NANO
- All digital and analog pins breakout
- Leads all pins out, convenient for wiring and doing experiments.