Arduino
Showing 1–20 of 122 results
There are various ardunio uno based boards, sensors,shields,project parts for beginners to professional maker.

0.96 Inch O LED Display 6-Pin 128X64
0.96 Inch O LED Display 6-Pin 128X64 has following features OLED Driver IC: SSD1306 Colour: Blue Resolution: 128 x 64 Visual Angle: >160° Input Voltage: 3.3V ~ 6V Compatible I/O Level: 3.3V, 5V Mini Size: 2.7 x 2.8cm Only Need … Continued

0.96 OLED Display 4 Pin 128×64 I2C Arduino
Tiny 128×64 is a OLED Display 4 Pin based on SSD1306 Display controller chip. The display is mounted on an easy to solder PCB. The SSD1306 Display interfaces to microcontrollers through a I2C serial bus interface. OLED Technology, Self-luminous, need no back-light (consumes less energy) … Continued

0.96″ IIC/SPI Serial 128×64 OLED Display Module-7Pin
IIC/SPI Serial 128×64 O-LED Display Module-7Pin This is a 0.96 inch blue O-LED Display Module. The display module can be interfaced with any microcontroller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes display board,display, 7 … Continued

13.56MHz RFID IC Key Tag – 2Pcs
- Material: ABS,
- Dimension(LxWxH): 43.7×30.5×5.3mm,
- Response Frequency: 13.56MHz,
- Chip type: FM1108 Fudan Chip,
- Memory capacity: 8 kbit,
- Designed for the RFID 13.56MHz duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.

2.4 Inch TFT Touch Screen LCD Shield For Arduino

2WD Smart Robot Car Chassis kit With Battery Box & Speed Encoder

3.5″ Touch LCD Shield For Arduino Uno-Mega
- 3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
- It can control the backlight to connect the transistor to a digital pin
- 480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
- 4-wire resistive touchscreen
- 8-bit digital interface, plus 4 control lines

3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap

4 Digit TM1637 Clock Display Module For Arduino
This 4 Digit TM1637 Clock Display Module For Arduino is TM1637 Based Serial 8-Digit 7 Segment LED Display Module. Also Called LED Tube Display. It has an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 4 digit 7-segment digital … Continued

5V Active Alarm Buzzer Module For Arduino
- Bring Oscillation Source
- It and your Arduino or Development board will be able to play melodies.
- It creates different sound based on different frequency of I/O toggling.

8-Bit Digital LED TM1638 Key Display Module For Arduino

9V Battery Snap Connector To DC Jack For Arduino – 10Pcs
- Excellent material
- It is an environmental 9V battery buckle
- The Cable Length: 12cm Approx.

A3144 Hall Effect Sensor Module
- Digital Output Hall-effect sensor.
- Operating voltage: typically 5V.
- Output Current: 25mA.
- It can be used to detect both the poles of a magnet

A7 GSM GPRS GPS 3 In 1 Module Shield Support Voice Message
A7 GSM GPRS GPS 3 In 1 Module supports GSM/GPRS Quad-Band( 850/900/1800/190) network. Also, it supports voice calls,SMS messages,GPRS data service and GPS function .We can use it make a simple phone. The module is controlled by AT command via … Continued

Advanced Interaction Technology Kit

All In One Shield Kit With Arduino

AMG8833 IR Thermal Camera Breakout Board
- Temperature detection of the two-dimensional area: 8 × 8 (64 pixels).
- Digital output (capability of temperature value output).
- Compact SMD package (adaptively to reflow mounting).

AMS1117 3.3V Power Supply Module
- Input: DC 4.5V – 12V (input voltage must be more than output voltage (more than 1V))
- Output: 3.3V, 800mA (load current cannot exceed 800ma)
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Small Compact Size, 4Pin Type, Breadboard Friendly.
- Dual-panel design, the layout is nice

APDS-9960 RGB Infrared Gesture Sensor
- Model: GY-APDS9960-3.3
- Chip: APDS-9960
- Power Supply: 3.3VDC
- Communication Through I2C Protocol
