There are various type of LI-iON Batteries, Charger & Holder for project to industrial applications.

Wemos® 18650 Battery Charge Shield V3 For Raspberry Pi Arduino
18650 Battery Charge Shield V3 For Raspberry Pi Arduino
This 18650 Battery Charge Shield V3 is for Arduino, Raspberry Pi,esp8266 or Sensors with protection board.The output current can reach upto 2A.
not rated 200.00 + GST Add to basket
1S 18650 Li-Ion Lithium Battery BMS Charger Protection Board For 3.7V Battery
1S 18650 Li-Ion Lithium Battery 3.7V BMS Charger Protection Board

This is 1S 18650 Li-ion Lithium Battery BMS Charger Protection Board for 3.7V Battery. Lithium-Ion charge protection circuit comes with over-charge, over-discharge, over-current and short circuit protection. MOS transistor can control the battery charge and discharge, Built-in three-stage over-current detection circuit, … Continued

not rated 70.00 + GST Add to basket
2 x 1.5V AA Battery Holder With Cover And On/Off Switch
2 x 1.5V AA Battery Holder With Cover And On/Off Switch

The Plastic Covered AA x 2 battery holder with cover and on/off switch for 2 x AA Battery with On/Off Switch puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is … Continued

not rated 50.00 + GST Add to basket
2S 7.4V 8A Li-Ion 18650 Lithium Battery Charger Protection Board
2S 7.4V 8A Li-Ion 18650 Lithium Battery Charger Protection Board

2S 7.4V 8A Li-Ion 18650 Lithium Battery Charger Protection Board Model: HX – 2S – A10 overcharging range: 4.25-4.35 v plus or minus 0.05 v Size: 41 * 8 * 2.2 mm over voltage range: 2.5-3.0 v plus or minus … Continued

not rated 200.00 + GST Add to basket
2xAA Battery Holder
2xAA Battery Holder
The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for the devices need a 3V external battery.
not rated 25.00 + GST Add to basket
3S 4A 12V 18650 Lithium Battery Protection Board BMS
3S 4A 12V 18650 Lithium Battery Protection Board BMS

3S 4A 12V 18650 Lithium Battery Protection Board BMS 3S 18650 4A bms Li-ion Battery Protection Board PCB BMS 11.1V 18650 Battery Charging Module 3S Charger Electronic DIY HX-3S-A01 Product parameters Charging Voltage: 12.6V-13V Overcharge Voltage Range: 4.25V-4.35V ± 0.05V … Continued

not rated 200.00 + GST Add to basket
3 x AA Battery Holder For 4.5V Output
3xAA Battery Holder For 4.5V Output
This is a 3xAA Battery Clip Slot Holder Stack Box Case for 4.5V output. The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for the devices need a 4.5V external battery.
not rated 60.00 + GST Add to basket
4 x 1.5V AA Battery Holder With Cover And On/Off Switch
4 x 1.5V AA Battery Holder With Cover And On/Off Switch

The 4 x 1.5V AA Battery Holder With Cover And On/Off Switch puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small head screw. Another advantage is the … Continued

not rated 70.00 + GST Add to basket
4 AA Cell Battery Holder
4AA Cell Battery Holder

4AA Cell Battery Holder for 4 x 1.5V batteries with wire leads. Provides a total of 6V with 4 cells in series. Specifications: Material: Plastic Color: Black Size: approx. 77x 81 x 21mm(Not count the wire length) Net weight: 26g

not rated 40.00 + GST Add to basket
6 x AA Battery Holder 3X2 For 9V Output
6 x AA Battery Holder 3X2 For 9V Output
This battery holder can hold 6 AA battery  which can make  7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells. It comes with a 6" Red & Black Wires with side by side & stack connection.
not rated 90.00 + GST Add to basket
6 x AA Battery Holder For 9V Output
6xAA Battery Holder For 9V Output
This is a 6 x AA Battery Clip Slot Holder Stack Box Case for 9V output. The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for the devices need a 9V external battery.
not rated 60.00 + GST Add to basket
Black Plastic Storage Box Case Holder For Battery 1 x 18650 Cell Box
Black Plastic Storage Box Case Holder For Battery 1 x 18650 Cell Box

This is a Black Plastic Storage Box Case Holder for Battery 1 x 18650 Cell Box The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case … Continued

not rated 30.00 + GST Add to basket
Black Plastic Storage Box Case Holder For Battery 2 x 18650 Cell Box
Black Plastic Storage Box Case Holder For Battery 2×18650 Cell Box
  1. Hold 2 standard 18650 batteries.
  2. Wire Length: 15 cm.
  3. Output: 7.2V.
  4. Dimension (Approx.) : 76 x 40 x 20 mm
  5. Weight: 12gm
  6. High-quality plastic material
not rated 39.00 + GST Add to basket
Black Plastic Storage Box Case Holder For Battery 3 x 18650 Cell Box
Black Plastic Storage Box Case Holder For Battery 3 x 18650 Cell Box
  1. Hold 3 standard 18650 batteries.
  2. Wire Length: 15 cm.
  3. Output: 11.1 V.
  4. Dimension (Approx.) : 76 x 60 x 18 mm.
  5. Weight: 18 gm.
  6. High-quality plastic material
not rated 49.00 + GST Add to basket
CR2032 Coin Cell Battery Holder -10 PCs.
CR2032 Coin Cell Battery Holder -10 PCs.
This is single cell CR2032 battery holder. It is Mounts Directly on PCB in small area. This space saving design allows components to be placed under the holder. This is ideal when board space is more important then board height.
not rated 50.00 + GST Add to basket
Dual Micro USB 3.7V to 5V, 2A Power Bank DIY 18650 LiPo Charger
Dual Micro USB 3.7V to 5V, 2A Power Bank DIY 18650 LiPo Charger
  1. 4-level LED lamp display power, not working state intelligent automatic shutdown;
  2. Built-in lithium battery protection IC, over-current,  under voltage protection;
  3. Dual USB output ports.
  4. Dimensions: 68 x 34 x 9 mm (LxWxH)
  5. Input port: MicroUSB (Andro)
  6. Output port: USB
  7. Output parameters: 5V1A/5V2A
  8. Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
not rated 150.00 + GST Read more
HX-2S-A2 Circular 2S 8.4V BMS 18650 Lithium Battery Protection Board
HX-2S-A2 Circular 2S 8.4V BMS 18650 Lithium Battery Protection Board

This is an HX-2S-A2 Circular 2S 8.4V BMS 18650 Lithium Battery Protection Plate With short circuit protection, overload, discharge and overcharge protection.  Due to its small size, excellent performance and low cost, the product is suitable to meet a wide range of … Continued

not rated 90.00 + GST Add to basket
LI-ION 14.8V 4S Charge/Discharge Protection Circuit Board
LI-ION 14.8V 4S BMS Charge/Discharge Protection Circuit Board

This is LI-ION 14.8V 4S BMS Charge/Discharge Protection Circuit Board Lithium-Ion charge protection circuit comes with over-charge, over-discharge, over-current and short circuit protection, for a variety of various shapes 3.7V lithium Ion batteries. HX-4S-A01 is Small size, suitable for many … Continued

not rated 300.00 + GST Add to basket
Li-Ion 4S 14.8V 10A 18650 Lithium Battery Protection Board
Li-Ion 4S 14.8V 10A 18650 Lithium Battery Protection Board

This Li-Ion 4S 14.8V 10A 18650 Lithium Battery Protection Board comes with over-charge, over-discharge, over-current and short circuit protection, for a variety of various shapes 3.7V lithium-Ion batteries. HX-4S-A01 is Small size, suitable for many requirements of high integration, low … Continued

not rated 250.00 + GST Add to basket
LiFePO4 32650-3.2V 5000mAh Lithium Battery
LiFePO4 32650-3.2V 5000mAh Lithium Battery

LiFePO4 32650-3.2V 5000mAh Lithium Battery   Applications of LiFePO4 battery:  Light electric car, e-bike, electric scooter, e-rickshaw,electric golf cart, forklift, cleanness car, electric wheelchairs. E-tools like electric drill.electric saw,lawn mower and so on Remote control cars ,boat aircraft,toys. Solar and … Continued

not rated 300.00 + GST Add to basket