3D Printer Parts

Showing 1–20 of 57 results

Various type of 3D Printer Parts to make your own 3 D Printer.

Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch with Copper Nut
1000mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch With Copper Nut
  • Lead Screw Material: 304 Stainless Steel.
  • Length: 1000mm.
  • Diameter: 8mm.
  • 4 Start Lead Screw
  • Brass Nut Size:  22(Body Diameter) x 15 mm.
  • Mainly use for Stepping motor driving guide rail.
  • T shape design, made of high-quality stainless steel material.
  • Easy to install and convenient to use.
not rated ₹944.00 Add to basket
100K OHM NTC Thermistors For Reprap 3D Printer
100K OHM NTC Thermistors For Reprap 3D Printer

100K OHM NTC Thermistors For Reprap 3D Printer for temperature sensor is one where the thermistor chip is welded with leads by alloy soldering process, then partially treated by glass sealing. The element has a bead form with good stability, … Continued

not rated ₹118.00 Add to basket
Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch with Copper Nut
100mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch With Copper Nut
  • Lead Screw Material: 304 Stainless Steel.
  • Length: 100mm.
  • Diameter: 8mm.
  • 4 Start Lead Screw
  • Brass Nut Size:  22(Body Diameter) x 15 mm.
  • Mainly use for Stepping motor driving guide rail.
  • T shape design, made of high-quality stainless steel material.
  • Easy to install and convenient to use.
not rated ₹177.00 Add to basket
Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch with Copper Nut
145mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Copper Nut
145mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut  is Mainly used for Stepping motor driving guide rail.  
not rated ₹236.00 Add to basket
Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch with Copper Nut
300mm Trapezoidal Lead Screw 8mm Thread 2mm Pitch Copper Nut
300mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch Lead Screw with Copper Nut  is Mainly used for Stepping motor driving guide rail.  
not rated ₹413.00 Add to basket
3D Printer 12V DC 50mm Blow Radial Cooling Fan
3D Printer 12V DC 50mm Blow Radial Cooling Fan

3D Printer Cooling Fan12V DC 50mm Blow Radial Cooling Fan Excellent for cooling heatsinks on hot ends, prints, or other cooling needs Made of high quality PBT+30% glass line +VO Bearing is high precision, long life and low noise Temperature … Continued

not rated ₹118.00 Add to basket
RAMPS 1.4 Reprap 3D Printer Arduino Mega Shield (RAMPS)
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model it is mainly designed for the purpose of using pololu stepper driven board (similar to 4988 driven board). RAMPS can only work when connected to its mother board Mega 2560 and 4988/DRV8825. Owning to its stability in operation and great compatibility with most 3D printer.
not rated ₹354.00 Add to basket
3D Printer J-Head E3D V6 Hotend Extruder Nozzle With 12V Fan
3D Printer J-Head E3D V6 Hotend Extruder Nozzle With 12V Fan
  1. Nozzle diameter: 0.4mm
  2. Voltage: 12V.
  3. Power: 40W.
  4. Feed diameter : For 1.75mm Filament
not rated ₹708.00 Add to basket
3D Printer E3D V6 J-head Hotend 1.75mm Filament Bowden Extruder Nozzle 0.4mm
3D Printer J-Head E3D V6 Hotend Extruder Nozzle With 12V Fan & 1M PTFE
  1. Nozzle diameter: 0.4mm
  2. Voltage: 12V.
  3. Power: 40W.
  4. Feed diameter : For 1.75mm Filament
  5. Heater size : 6 x 15mm(DxL).
  6. E3D V6 Type for RepRap 3D Printer
not rated ₹944.00 Add to basket
3D Printer Kit RAMPS 1.4+ Mega 2560 + 5* A4988 LCD 128*64
3D Printer Kit RAMPS 1.4+ Mega 2560 + 5* A4988 LCD 128*64
This is the New Starter Kit, specially for those beginners who are interested in 3D printers. You will have a complete set of most common and useful electronic components.
not rated ₹3,186.00 Add to basket
3D Printer Mechanical Limit Switch With Wire
3D Printer Mechanical Limit Switch Module With Wire

3D Printer Mechanical Limit Switch Module With Wire The mechanical end stop uses a lever switch to detect when it is activated . The switch is wired up so that when activated , it pulls the signal to LOW . … Continued

not rated ₹100.30 Add to basket
3D Printer Ramps 128X64 Full Graphic Control Board
3D Printer Ramps 128X64 Full Graphic Control Board

3D Printer Ramps 128X64 Full Graphic Control Board This Smart Controller contains a SD-Card reader, an rotary encoder and a 128×64 LCD display. You can easy connect it to your Ramps board using the “smart adapter”. After connecting this panel … Continued

not rated ₹1,180.00 Add to basket
3D Printer Ramps 20X04 LCD Smart Controller
3D Printer Ramps 20X04 LCD Smart Controller

3D Printer Ramps 20X04 LCD Smart Controller The intelligent controller includes an SD card reader, rotary encoders and a 20-character × 4 line LCD display. You can easily connect it to your RAMPS 1.4 board using “smart adapter” included. This … Continued

not rated ₹944.00 Add to basket
Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch with Copper Nut
400mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch with Copper Nut
Lead Screw Material: 304 Stainless Steel. Length: 400mm. Diameter: 8mm. 4 Start Lead Screw. Brass Nut Size: 10 x 13 x 22 mm. Mainly use for Stepping motor driving guide rail. T shape design, made of high-quality stainless steel material. Easy to install and convenient to use.
not rated ₹531.00 Add to basket
Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch with Copper Nut
500mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch With Copper Nut
  • Lead Screw Material: 304 Stainless Steel.
  • Length: 500mm.
  • Diameter: 8mm.
  • 4 Start Lead Screw
  • Brass Nut Size:  22(Body Diameter) x 15 mm.
  • Mainly use for Stepping motor driving guide rail.
  • T shape design, made of high-quality stainless steel material.
  • Easy to install and convenient to use.
not rated ₹590.00 Add to basket
Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch with Copper Nut
600mm Trapezoidal 4 Start Lead Screw 8mm Thread 2mm Pitch With Copper Nut
  • Lead Screw Material: 304 Stainless Steel.
  • Length: 600mm.
  • Diameter: 8mm.
  • 4 Start Lead Screw
  • Brass Nut Size:  22(Body Diameter) x 15 mm.
  • Mainly use for Stepping motor driving guide rail.
  • T shape design, made of high-quality stainless steel material.
  • Easy to install and convenient to use.
not rated ₹708.00 Add to basket
8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08
8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08
  • Type: KP08
  • Material: zinc alloy
  • Bore Diameter:8mm
  • Mounting Hole Diameter: 5 mm
  • Durable with high precision
not rated ₹141.60 Add to basket
8mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL08
8mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL08

This 8mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL08 is a quality flanged ball bearing end mount, widely used in CNC and 3D printing applications. Made from a zinc-aluminum alloy, it houses a 608 bearing, which supports linear … Continued

not rated ₹141.60 Add to basket
A4988 Stepper Driver With Heatsink
A4988 Stepper Motor Driver With Heatsink

The A4988 stepper motor driver carrier is a breakout board for Allegro’s A4988 micro stepping bipolar stepper motor driver. The driver features adjustable current limiting, over current and over temperature protection, and five different micro step resolutions (down to 1/16-step). … Continued

not rated ₹177.00 Add to basket
Aluminum Flexible Coupling -5mm To 5mm
Aluminum Flexible Coupling -5mm To 5mm

These Aluminum Flexible Coupling -5mm To 5mm couplers are made of machined aluminum and have a spiral cut that makes them slightly flexible so they can be fit to two shafts even if they are not perfectly co-linear and will … Continued

not rated ₹118.00 Add to basket