Charger-BMS Board
Showing 1–20 of 23 results
Charger BMS Board for various applications
18650 Battery Charge Shield V3 For Raspberry Pi Arduino
1S 18650 Li-Ion Lithium Battery 3.7V BMS Charger Protection Board
This is 1S 18650 Li-ion Lithium Battery BMS Charger Protection Board for 3.7V Battery. Lithium-Ion charge protection circuit comes with over-charge, over-discharge, over-current and short circuit protection. MOS transistor can control the battery charge and discharge, Built-in three-stage over-current detection circuit, … Continued
1S 2A 18650 Li-Ion Battery 3.7V BMS With Nickel Plate -10 Pcs
1S 2A 18650 Li-Ion Battery 3.7V BMS With Nickel Plate -10 Pcs Package included: 1 x 1S 2A 18650 Li-Ion Battery 3.7V BMS With Nickel Plate -10 Pcs
2S 7.4V 8A Li-Ion 18650 Lithium Battery Charger Protection Board
2S 7.4V 8A Li-Ion 18650 Lithium Battery Charger Protection Board Model: HX – 2S – A10 overcharging range: 4.25-4.35 v plus or minus 0.05 v Size: 41 * 8 * 2.2 mm over voltage range: 2.5-3.0 v plus or minus … Continued
2S Lithium Battery Pack Power Indicator Board 6.6V-8.4V
2S Lithium Battery Pack Power Indicator Board 6.6V-8.4V Instructions: Connect the positive and negative terminals of the display board and connect them to the positive and negative terminals of the tested battery. The digital display shows the real-time battery power. … Continued
3.7V Li-Ion Battery Charger Single Universal
- Slim and portable design
- High quality and good performance
- Perfect fitting
- Automatically stops when charging is complete.
3S 12V 10A 18650 Lithium Battery Charger Protection Board Module
- Three series of lithium battery protection board.
- Automatically cancel protection after protection conditions restore.
- Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
- Quiescent current < 30uA, so power consumption is small.
- With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
3S 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
- 3S 11.1V 12.6V 20A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery).
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery).
- Continuous discharge current (upper limit): 20A (if the cooling environment is not good, please reduce the load current use).
- Continuous charge current (upper limit): 20A.
- Suitable for the drills with starting current below 80A, power below 135W
3S 4A 12V 18650 Lithium Battery Protection Board BMS
3S 4A 12V 18650 Lithium Battery Protection Board BMS 3S 18650 4A bms Li-ion Battery Protection Board PCB BMS 11.1V 18650 Battery Charging Module 3S Charger Electronic DIY HX-3S-A01 Product parameters Charging Voltage: 12.6V-13V Overcharge Voltage Range: 4.25V-4.35V ± 0.05V … Continued
3S 8A 11.1V 18650 Lithium Battery Protection Board BMS
3S 8A 11.1V 18650 Lithium Battery Protection Board BMS Package included: 1 x 3S 8A 11.1V 18650 Lithium Battery Protection Board BMS
3S Lithium Battery Pack Power Indicator Board 11.1V-12.6V
3S Lithium Battery Pack Power Indicator Board 11.1V-12.6V Connect the positive and negative terminals of the display board and connect them to the positive and negative terminals of the tested battery. The digital display shows the real-time battery power. Power … Continued
6S BMS 22V 18650 Lithium Battery Protection Board
- Model: 6 string 22V lithium battery protection board.
- Maximum operating current: Within15A.
BMS LIFEPO4 4S 12.8V 8A HXYP-4S-BM15
BMS LIFEPO4 4S 12.8V 8A HXYP-4S-BM15 The Lifepo4 battery protection board adopts a highly integrated intelligent lithium battery protection board integrated chip, and the performance is superior to the protection board composed of discrete chips. Can complete 4 string battery … Continued
Dual Micro USB 3.7V to 5V, 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- Built-in lithium battery protection IC, over-current, under voltage protection;
- Dual USB output ports.
- Input port: Micro USB
- Output port: USB
- Output parameters: 5V1A/5V2A
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
HX-2S-A2 Circular 2S 8.4V BMS 18650 Lithium Battery Protection Board
This is an HX-2S-A2 Circular 2S 8.4V BMS 18650 Lithium Battery Protection Plate With short circuit protection, overload, discharge and overcharge protection. Due to its small size, excellent performance and low cost, the product is suitable to meet a wide range of … Continued
Li-Ion 4S 14.8V 10A 18650 Lithium Battery Protection Board
- Model; HX-4S-A01
- This protection board is suitable for 4 series Li-ion cell.
- Adopt a precision integrated circuit for fast and safe charging.
- Support overcharge protection, over-discharge protection, and short circuit protection.
Li-ion Battery Charger Universal Dual 3.7V with AC Cord
LIPO Battery Charger Module With Protection Circuit TP4056-1A – 10Pcs
LIPO Battery Charger Module With Protection Circuit TP4056-1A – 10Pcs Pack
LIPO Battery Charger Module With Protection Circuit TP4056-1A Micro USB
Mobile Power Bank Charger Module USB 5V 1A For 18650 Battery
Mobile Power Bank Charger Module USB 5V 1A For 18650 Battery This Mobile Power Bank Charger Module is a super mini power bank main board compatible with 3.7V-4.2V li-ion battery. On-board micro USB port for battery charging and USB type A … Continued