View basket “8mm Inner Diameter Zinc Alloy Pillow Block Flange Bearing KFL08” has been added to your basket.
Showing 241–260 of 980 results
Aluminum GT2 Timing Pulley 20 Tooth 5mm Bore For 6mm Belt
Rated 0 out of 5
0 Reviews
GT2 Timing Pulley for RepRap, 3D Printer, CNC, Robotics and Automations. GT2 TIMING PULLEY (20 TEETH, 6MM WIDTH, 5MM BORE DIA)
- Material: Aluminum.
- No. of teeth: 20.
- Outer Diameter: 12.5mm.
- Inner Diameter: 5mm.
- Weight: 6 gm.
Aluminum Heat Sink Case With Double Fans For Raspberry Pi 4B – Black
Rated 0 out of 5
0 Reviews- Type: Raspberry 4B Aluminum Alloy Metal Case
- Material: Black Aluminum Alloy Metal
- Compatible For：Raspberry PI 4
- Easy to install, Ultra-thin design.
- Open case design with Daul Fans for Fast Heat dissipation.
- Weight: 110gm
Aluminum Servo Arm Round Disk Type 25T -2 Pcs
Rated 0 out of 5
0 Reviews- Material: Aluminum
- M3 Screws -4Pcs
-
Adjustable type servo arm
-
Mounting Hole Spacing: 14mm
-
Servo disc diameter: 20mm
- 25Tooth
Aluminum Steering Servo Horn Arm For Futaba Standard 25T
Rated 0 out of 5
0 Reviews
It is adjustable RC rocker for RC planes servo motors. Aluminum Hole centers at 20 and 24mm from the servo output 25T spine for RC Plane. It includes two steel bolt to secure the split clamp onto servo output.
AMS1117 3.3V Power Supply Module
Rated 0 out of 5
0 Reviews- Input: DC 4.5V – 12V (input voltage must be more than output voltage (more than 1V))
- Output: 3.3V, 800mA (load current cannot exceed 800ma)
- Onboard AMS1117 chip.
- Onboard power indicator to indicate power is turned on: Red LED.
- Small Compact Size, 4Pin Type, Breadboard Friendly.
- Dual-panel design, the layout is nice
AMS1117 5V Step-Down Power Supply Module
Rated 0 out of 5
0 Reviews
Input: DC 6.5V – 12V (input voltage must be more than output voltage (more than 1V)), Output: 5.0V (+-0.05v error), 800mA (load current cannot exceed 800mA), On-board AMS1117 chip., On-board power indicator to indicate power is turned on: Red LED. Small Compact Size, 4Pin Type, Breadboard Friendly. Dual-panel design, the layout is nice
Analog TDS Sensor Water Quality Sensor Module Board Kit
Rated 0 out of 5
0 Reviews- Wide voltage operation: 3.3~5.5V
- 0~2.3V analog signal output, compatible with 5V, 3.3V two control systems
- The excitation source is an AC signal, effectively preventing probe polarization
- Waterproof probe for long-term immersion in water
Anti-Static Tweezers 2Pcs Set ESD-11 & ESD-15
Rated 0 out of 5
0 Reviews- Made by the high-quality stainless steel
- Antistatic, Anti-magnetic and anti-acid
- Cutting-edge parts of pure manual polishing, fine workmanship
- Tips after a long time use are still super straight.
- 2 pcs suitable for all kinds of electronic components, convenient, improve the work efficiency
APDS-9960 RGB Infrared Gesture Sensor
Rated 0 out of 5
0 Reviews- Model: GY-APDS9960-3.3
- Chip: APDS-9960
- Power Supply: 3.3VDC
- Communication Through I2C Protocol
Arduino 37 In 1 Sensor Kit Set
Rated 0 out of 5
0 Reviews
Infrared sensor receiving module.Laser sensor module.Temperature and humidity sensor module.Infrared sensor module.5v relay module.Obstacle avoidance sensor module
Arduino 3D Printer Controller Kit – Mega 2560 Board+128*64 LCD+RAMP1.4
Rated 0 out of 5
0 Reviews
This is the New Starter Kit, specially for those beginners who are interested in 3D printers. You will have a complete set of most common and useful electronic components.
Arduino Compatible 2WD Chassis Assembly
Rated 0 out of 5
0 Reviews
This is two wheel drive robot chassis with 2 Bo motor and a caster wheel.it has Compatible voles for arduino UNO and motor driver board
Arduino Leonardo With ATmega32u4
Rated 0 out of 5
0 Reviews
The Arduino Leonardo with ATmega32u4 is a microcontroller board based on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button.
Arduino Mega 2560 ADK With Cable
Rated 0 out of 5
0 Reviews
The Mega R3 Android Accessory Development Kit (ADK) + USB Cable is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC.It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button.
Arduino Mega 2560 R3 Board
Rated 0 out of 5
0 Reviews
This board is based on and fully compatible with Arduino Mega 2560 R3. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button