PRODUCT CATEGORY



NEWEST PRODUCTS

30KG Serial Bus Servo Waveshare
30KG Serial Bus Servo Waveshare
  • Model: ST3215 serial bus servo
  • Operating voltage: 6 – 12V
  • Mechanical limited  angle: No Limit
  • POS sensor resolution: 180° / 1024
  • Idling speed: 0.18sec / 60°@4.8V 0.16sec / 60°@6V
  • Baud-rate:  38400bps – 1Mbps
not rated 2,832.00 Add to basket
LilyTiny LilyPad Micro USB ATtiny85 Wearable Module
LilyTiny LilyPad Micro USB ATtiny85 Wearable Module
  • 8K Byte of In-System Programmable Program Memory Flash
  • 512 Bytes In-System Programmable EEPROM
  • 512 Bytes Internal SRAM
  • Diameter:25mm
not rated 472.00 Add to basket
WiFi and Bluetooth ESP32 4MB Flash D1 R32 CH340G Development Board Micro USB
WiFi & Bluetooth ESP32 4MB Flash CH340G Development Board Micro USB
  • Microcontroller: ESP32
  • Flash Memory: 4MB
  • Wireless Connectivity: WiFi and Bluetooth
  • USB-to-Serial Converter: CH340G
not rated 413.00 Add to basket
Witty Cloud Development Board + MINI Node MCU
Witty Cloud Development Board + MINI NodeMCU
  • LDR Light Sensor on board
  • WS2812 Led on board
  • Includes CH340G USB-to-UART programmer
  • Includes LDR (light dependent resistor a.k.a photoresistor) connected to ESP’s ADC pin
  • Supports 3 modes: AP,STA,AP+STA
  • Dimensions: 24mm x 16mm
  • Micro USB connection for power and/or programming
not rated 295.00 Add to basket


FEATURED PRODUCTS

300W 20A DC-DC Buck Converter Step-down Module
300W 20A DC-DC Buck Converter Step-down Module
  • High Power DC-DC Step Down Module
  • Input Voltage: 6-40V DC
  • Output Voltage: 1.25-36V DC
not rated 649.00 Add to basket
Bonka 4200mAh 35C 3S
Bonka 4200mAh 35C 3S1P 11.1V Lipo Battery With XT60 Plug
  • This is 4200mAh 11.1V Bonka Lithium Polymer battery.
  • The Bonka LiPo battery is integrated with a JST-XH balance plug and XT60 discharge plug.
  • It is designed to have a Max Continuous Discharge of 35C and Max Burst Discharge of 70C.
  • The 11.1V 4200mAh Bonka LiPo battery packs are equipped with heavy duty discharge leads that is highly essential to minimize the resistance and sustain high current loads.
  • They help in powering Qaudcopter,
not rated 3,540.00 Read more
DIY RC Quadcopter Drone Kit XYQ-2
DIY RC Quadcopter Drone Kit XYQ-2
Functions: Sideward flight, turn left/right, up/down, forward/backward, altitude hold, one key takeoff/landing, 3D flip, headless mode, one key return
not rated 2,950.00 Add to basket
ESC 40A 2-4S ReadyToSky For Drone
ESC 40A 2-4S ReadyToSky For Drone
  • 40A OPTO 2-4S Brushless ESC.
  • The applicable number of battery cells:2-4S.
  • BEC output: 5V 3A.
  • Use for F450 450mm S500 ZD550 RC Helicopter Quadcopter.
  • Highly intelligent, adaptive ability, extremely easy to use.
not rated 826.00 Add to basket
NEMA23 18.9kg-cm Hybrid Stepper Motor
NEMA23 30.61Kg-cm Hybrid Stepper Motor D-Type Shaft
Ideal Motor for CNC machines. Standard Nema23 frame size. 18.9Kgcm bipolar mode torque.
  • Step Angle Step Angle: 1.8 °
  • Current: 4 A/Phase
  • Motor Typr: Bipolar
  • Holding Torque: 306 N-cm
  • Detent torque: 6.8 N.cm (Maximum)
  • Lead Wires: 4
  • Shaft diameter: 8 mm
not rated 2,950.00 Add to basket
Nextion BASIC NX4832T035-3.5″ HMI TFT LCD Touch Display Module
Nextion BASIC NX4832T035-3.5″ HMI TFT LCD Touch Display Module
Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to the Internet of thing (IoT) or consumer electronics field.
not rated 4,366.00 Read more
Ready To Sky 40A 2-6S Brushless Opto ESC For Drones
Ready To Sky 40A ESC 2-6S Brushless Opto ESC For Drones
  • Specifintegrated circuitation:
  • Brand:ready to sky
  • Cont.Current:40A
  • Burst Current(10sec):60A
  • BEC:None
  • Lipo:2-6S
  • Firmware : Hobbywing Xrotor 40A
  • Weight:26g
  • Size:68x25x8.7mm
not rated 1,416.00 Add to basket
Soldron Portable SMPS Variable Wattage Micro Soldering Station
Soldron Portable SMPS Variable Wattage Micro Soldering Station
 
  • High-Grade Plastic Body Station and Iron
  • Pre-Printed Set and Run Modes on station
  • Absolutely ESD safe and ideal for SMD/SMT work and rework
 
Rated 5.00 out of 5
1,345.20 Add to basket