4-Way Infrared Tracking Obstacle Avoidance Sensor Module
4-Way Infrared Tracking Obstacle Avoidance Sensor Module

4-Way Infrared Tracking Obstacle Avoidance Sensor Module. Every road of the infrared transmitting tube continuously launch infrared sensor, the infrared ray is emitted when the intensity of reflected back has not been reflected or but is not big enough, the … Continued

not rated 250.00 + GST Add to basket
ADXL345 IIC / SPI Digital Tilt Sensor Accelerometer
ADXL345 IIC / SPI Digital Tilt Sensor Accelerometer
The ADXL345 IIC / SPI Digital Tilt Sensor Accelerometer is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital output data is formatted as 16-bit too complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.
not rated 250.00 + GST Add to basket
APDS-9930 RGB Infrared Gesture Sensor
APDS-9930 RGB Infrared Gesture Sensor
The APDS-9930 sensor is an all-in-one chip, which can measure light, gestures and distance. The distance detection works up to about 100mm, this chip is often used in phones to lock / dim the screen when the phone is held against the ear. Furthermore, the light intensity can be measured and 'calculated' the module gestures such as swiping to the left, right, up and down.
not rated 250.00 + GST Add to basket
37 in 1 Sensor kit for Arduino
Arduino 37 In 1 Sensor Kit Set
Infrared sensor receiving module.Laser sensor module.Temperature and humidity sensor module.Infrared sensor module.5v relay module.Obstacle avoidance sensor module
not rated 1,100.00 + GST Add to basket
Mount Holder for HC-SR04 Ultrasonic Sensor Module Blue
Car Mounted Acrylic Holder for HC-SR04 Ultrasonic Transducer -Blue

  Car Mounted Acrylic Holder for HC-SR04 Ultrasonic Transducer -Blue ● Thickness: 2.8 – 3.1mm ● Internal diameter: 16mm ● Diameter of mounting hole: 3.8MM ● Can be used in conjunction with HC – SR04 ultrasonic distance-measuring module

not rated 70.00 + GST Add to basket
Mount Holder for HC-SR04 Ultrasonic Sensor Module
DMDG Mounted Holder for HC-SR04 Ultrasonic Sensor Module

DMDG Mounted Holder for HC-SR04 Ultrasonic Sensor Module Lightweight and durable, easy to match the ultrasonic sensor Application: Stationary ultrasonic sensor modules and other products Note: This mount holder only supports Ultrasonic Module HC-SR04, DOES NOT support other type ultrasonic … Continued

not rated 55.00 + GST Add to basket
Doppler Radar Sensor With Digital Output-RCWL-0516
Doppler Radar Sensor With Digital Output-RCWL-0516
This mini Doppler Radar Sensor With Digital Output-RCWL-0516 is equipped with supporting DC 4-28V wide voltage It will automatically continuously output the high level TTL signal when there is motion. 360 degree no blind angle detection and maximum 7m sensing distance. It is perfect for DIY microwave motion sensor light switch, human sensor toys, smart security devices, etc.
not rated 100.00 + GST Add to basket
Dust Smoke Particle Sensor-GP2Y1010AU0F
Dust Smoke Particle Sensor-GP2Y1010AU0F
  1. Power supply voltage: DC5 ± 2V
  2. Operating Current: 20mA (peak)
  3. Sensitivity: 0.5V / (0.1mg / m3)
  4. The minimum detection level of particles: 0.8 m
  5. Clean air voltage: 0.9V typ.
not rated 500.00 + GST Add to basket
Fingerprint Module R307
Fingerprint Reader Sensor Module R307 (Optical)
Integrated image collecting and algorithm chip together, ALL-in-One.The fingerprint reader can conduct secondary development, can be embedded into a variety of end products.Low power consumption, low cost, small size, excellent performance.Professional optical technology, precise module manufacturing techniques. Good image processing capabilities can successfully capture an image up to resolution 500 dpi
not rated 1,850.00 + GST Add to basket
ARDUINO COMPATIBLE FINGER PRINT SCANNER GT-511C3 With Connector
FingerPrint Scanner GT-511C3 With Connector Arduino Compatible
The module is small and easy to mount using two mounting tabs on the side of the sensor. The on-board JST-SH connector has four signals: Vcc, GND, Tx, Rx. A compatible JST-SH pigtail can be found in the related items below. Demo software for PC is available in the documents below, simply connect the module to your computer using an FTDI Breakout and start the software to read fingerprints!
not rated 1,490.00 + GST Add to basket
FLex Sensor 2.2"
Flex Sensor 2.2″ Bend Sensor for Hand Gesture Recognition

Flex Sensor 2.2″ Bend Sensor for Hand Gesture Recognition A simple Flex Sensor 2.2″ – Bend Sensor with a length of 2.2″ which bends and flexes with a physical device. As the sensor is flex, the resistance across the sensor … Continued

not rated 425.00 + GST Add to basket
GY-213V-SI7021 Si7021 3.3V High Precision Humidity Sensor with I2C Interface For Arduino
GY-213V-SI7021 3.3V High Precision Humidity Sensor with I2C Interface
The module is designed for accurate measurement of humidity and temperature. The sensor is equipped with Si7021 chip with I2C interface, which provides industrial accuracy of measurements. The chip contains an analog-to-digital signal processing converter, calibration data and an I2C interface.
not rated 350.00 + GST Add to basket
AD8232 ECG Sensor with Electrode
Heart Rate Monitor Kit With AD8232 ECG Sensor Module
The AD8232 is an integrated front-end for signal conditioning of cardiac bioelectrical signals for heart rate monitoring. This is a low-power, single-lead, heart rate monitor analog front end for a wide range of vital signs monitoring applications.
not rated 950.00 + GST Read more
Heart Rate Pulse Sensor Module
Heart Rate Pulse Sensor Module

Heart Rate Pulse Sensor Module has following features The Pulse Sensor is a plug-and-play heart-rate sensor for Arduino. It can be used by students, artists, athletes, makers, and game & mobile developers who want to easily incorporate live heart-rate data into their … Continued

not rated 225.00 + GST Add to basket
Inductive Proximity Sensor - Magnetic Switch SN04-N
Inductive Proximity Sensor – Magnetic Switch SN04-N
General purpose inductive proximity sensor switch which can be used for end stop in CNC applications. You can simple avoid mechanical switch.
not rated 200.00 + GST Add to basket
GY-906 MLX90614ESF Non-Contact Infrared Temperature Sensor
Infrared Temperature Sensor Non-Contact GY-906 MLX90614ESF
 MLX90614ESF-is an infrared thermometer for non-contact temperature measurements. It can use with any microcontroller that can communicate with it through it's I2C interface
not rated 720.00 + GST Add to basket
Microwave Doppler Radar Motion Sensor Module HB100
Microwave Doppler Radar Motion Sensor Module HB100

Microwave Doppler Radar Motion Sensor Module HB100 Miniature Microwave Motion Sensor is a X-Band Bi-Static Doppler transceiver module. It has a built-in Dielectric Resonator Oscillator (DRO) and a pair of Microstrip patch antenna array, making it ideal for usage in … Continued

not rated 300.00 + GST Add to basket
MPU-9255 Three-axis Gyroscope Accelerometer
MPU-9255 Three-axis Gyroscope Accelerometer

Chip: MPU-9255 Power supply: 3-5v (internal low dropout regulator) Communication: standard IIC communication protocol built-in 16 bit AD converter, 16-bit data output Gyroscopes range: ± 250 500 1000 2000 ° / s Acceleration range: ± 2 ± 4 ± 8 … Continued

not rated 470.00 + GST Add to basket
MQ-7 Carbon Monoxide Gas Sensor
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
Sensitive material of MQ-7 gas sensor is SnO2, which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO when low temperature (heated by 1.5V).
not rated 160.00 + GST Add to basket
MQ135 Air Quality Control Gas Sensor
MQ135 Air Quality Control Gas Sensor

MQ135 gas sensor has high sensitivity to Ammonia (NH3), Sulfide (S2−) and Benzene (C6H6) steam, also sensitive to smoke and other harmful gases. It is with low cost and suitable for different application. Features Good sensitivity to Harmful gases in … Continued

not rated 170.00 + GST Add to basket