Showing 61–80 of 96 results
Nema 17 4.2 Kg-cm Bipolar Stepper Motor CNC Robotics 3D Printer
Rated 4.00 out of 5
(4.00)1 Review
NEMA23 18.9kg-cm Hybrid Stepper Motor – D-Type Shaft
Rated 0 out of 5
0 Reviews
Ideal Motor for CNC machines. Standard Nema23 frame size. 18.9Kgcm bipolar mode torque.
- Step Angle Step Angle: 1.8 °
- Current: 2.8 A/Phase
- Holding Torque: 189 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 6.35 mm
NEMA23 30.61Kg-cm Hybrid Stepper Motor D-Type Shaft
Rated 0 out of 5
0 Reviews
Ideal Motor for CNC machines. Standard Nema23 frame size. 18.9Kgcm bipolar mode torque.
- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Motor Typr: Bipolar
- Holding Torque: 306 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 8 mm
NEMA34 46kg-cm Hybrid Stepper Motor
Rated 0 out of 5
0 Reviews- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Lead Wires: 4
- Shaft diameter: 14 mm
- Shaft Length : 32mm
Orange TT555 12V 125RPM Rectangular Gearbox DC Motor-Encoder Compatible
Rated 0 out of 5
0 Reviews- Rated current (mA): ≤3200.
- Rated power (W): 7.186.
- Rated Torque (N-cm): 64.3
- Rated speed: 125 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 4500.
Orange TT555 12V 15RPM Rectangular Gearbox DC Motor
Rated 0 out of 5
0 Reviews- Rated current (mA): ≤1400.
- Rated power (W): 3.960.
- Rated Torque (N-m): 31.56
- Rated speed: 15 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 3000.
- Back shaft for Encoder Available
Orange TT555 12V 30RPM Rectangular Gearbox DC Motor
Rated 0 out of 5
0 Reviews- Rated current (mA): ≤2000.
- Rated power (W): 5.624.
- Rated Torque (N-m): 1.983
- Rated speed: 27 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 4500.
- Back shaft for Encoder Available
Orange TT555 12V 70RPM Rectangular Gearbox DC Motor
Rated 0 out of 5
0 Reviews- Rated current (mA): ≤2500
- Rated power (W): 6.655
- Rated Torque (N-cm): 112
- Rated speed: 70 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 4500.
Orange TT555 12V 8RPM Rectangular Gearbox DC Motor-Encoder Compatible
Rated 0 out of 5
0 Reviews- Rated current (mA): ≤900.
- Rated power (W): 3.550.
- Rated Torque (N-cm): 506.6
- Rated speed: 8 RPM.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 3000
Rectangular Geared DC Motor 30RPM
Rated 0 out of 5
0 Reviews- Rated current (mA): ≤2000.
- Shaft length (mm): 27.
- Shaft diameter (mm): 8.
- Base motor RPM: 4500.
Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi-16CH.-12Bit
Rated 0 out of 5
0 Reviews
This 16-CH. 12-bit PWM/Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi uses I2C 7-bit address between 0x60-0x80, selectable with jumpers.Terminal block for power input (or you can use the 0.1" breakouts on the side).Reverse polarity protection on the terminal block input.3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header
Servo Mount Holder Bracket For SG90/MG90 - 2Pcs
Rated 0 out of 5
0 Reviews
Servo Bracket holder for the SG90 Micro 9g Servo. It comes complete with the screws. Perfect fitting for Micro servo 9g/SG90.Acrylic 9G Servo Bracket.
Stepper Motor Driver TB6600 Subdivision 4.0A 42V
Rated 0 out of 5
0 Reviews
TB6600 stepper motor driver provides maximum 4.0A output current. TB6600 comes with output sort-circuit protection, Low-Pressure shut-off, Overheating parking and over-current protection.
