Servo Motors
Showing all 20 results
Different types of Servo motors used for robotic applications like Robotic arm, pick & place robot.

Aluminum Steering Servo Horn Arm For Futaba Standard 25T

CYS-S0200 20Kg High Torque Waterproof Digital Metal Gear Servo
- Model No.: CYS-S0200
- Description : 20Kg waterproof servo for 1/10 RC car steering
- Size : 40.5*20*39MM
- Torque : 18Kg.cm ~ 20Kg.cm
- Speed : 0.13sec ~ 0.11sec/60 degree
- Voltage : 6.0Volts ~7.4Volts dc
- Weight : 62± 1 g

Futaba S3003 Servo Motor-180 Degree
Futaba S3003 Servo Motor-180 Degree Control System: +Pulse Width Control 1520 usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C Operating Speed (4.8V): 0.23sec/60 degrees at … Continued

Futaba S3003 Servo Motor-360 Degree
- Torque - 4.8V: 3.2 Kg-cm 6.0V: 4.1 Kg-cm
- Speed - 4.8V: 023 Sec/ 60 deg 6.0V: 019 Sec/ 60
- Weight: 37 g
- Gear Type: Plastic

High Torque Servo CYS-S8218 Digital Metal Gear 40KG
This High Torque Servo CYS-S8218 Digital Metal Gear 40KG is used in industrial & for professional use. Easy to install Made of aluminum alloy material Stall torque of 36 kg.cm(6.0V), 38kg.cm (7.4V) High precision metal gear Suit for 1/5 RC … Continued

Long U Aluminium Servo Bracket Black
This Long U Aluminium Servo Bracket Black is designed to fit most standard sized servos. This bracket is both lightweight and strong. Various holes are located on the bracket that fit most servo horns. These brackets are light and strong … Continued

Metal Gear Servo Motor MG995-180º
Metal Gear Servo Motor MG995-180º Product Size: 40.7 * 19.7 * 42.9mm. Product weight: 55g. Operating torque: 13KG/cm. Reaction speed: 53-62R / M. Operating Temperature:-30 ~ +60 °. Deadband settings: 4 microseconds. Plug Type: JR, FUTABA General. Rotation angle: A … Continued

MG996R Metal Gear Digital High Torque Servo

Multi-Function Servo Motor Bracket Steering Head For MG995 MG996R
Multi-function Servo Motor Bracket Steering Head For MG995 MG996R The two-degree-of-freedom MG995 steering gear head is a small torque platform with high torque and high cost performance. It can perform two-degree-of-freedom movement in horizontal and vertical directions, which is convenient … Continued

Multipurpose Aluminium Standard Servo Bracket Black
This Multipurpose aluminium standard servo bracket black is compatible with TR Series Servo (TR205, TR213, TR223), Korea HS322, HS422, TowerPro MG995, MG996, SG5010 servos, Hitec, Parallax, Futaba, Fraser brand (size 40 × 20 × 36mm) standard servos. Aluminium Pan and … Continued

Pan Tilt Camera Mount – 2 Axis With Servos 9G DIY
Pan Tilt Camera Mount – 2 Axis with Servos 9G DIY is a servo based 2 axis pan and tilt mechanism for mounting wireless/ wired camera and sensors on your robots. Panning , rolling and tilting is achieved by controlling … Continued

PCA9685 16-Channel 12 BIT PWM Servo Motor Driver

Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi-16CH.-12Bit

Servo Extension Cable-30cm – Male To Female
Servo Extension Cable-30cm – Male To Female This is a 12 inch Servo Extension with J Connectors. On one end of the wire is a male “J” connector and on the other end of the wire is a female “J” … Continued

Servo Motor VTS08A GS-4060BB
Servo Motor VTS08A GS-4060BB Model:GS-4060BB Operating Voltage : 4.8V ~ 6.0V Idle current:200mA at 4.8V ,250mA at 6V Operating speed: 0.16 sec/60 @ 4.8V,0.19 sec/60 @ 6V Stall torque: > 6.3 kg-cm 4.8V,7kg-cm at 6V Weight: 40 g Size: 40.8*20.1*38.0mm Connector wire … Continued

Servo Mount Holder Bracket For SG90/MG90

Servo Tester / ESC Consistency Tester / PPM Generator
This Servo Tester device can be used as as signal generator for electric speed controller (ESC). You can test your motor system without using transmitter and receiver. Servo Tester has 3 modes to check or ESC: Manual Mode: turn the … Continued

Tower Pro SG90 9g Servo Motor
The Tower Pro SG90 9g Servo Motor is one of the most popular 9g servo in the world. The Tower Pro SG90 9g Servo motor is 180° rotation servo. It is a Digital Servo Motor which receives and processes PWM signal faster … Continued

Towerpro MG90S Mini Digital Servo 2.2kg / 0.08sec / 13g
- Model: MG90S
- Weight: 13 gm
- Operating voltage: 4.8V~ 6.6V
- Servo Plug: JR
- Stall torque @4.8V : 1.8kg-cm
- Stall torque @6.6V : 2.2kg-cm

TowerPro MG995 – Continuous Rotation 360° Metal Gear Servo Motor
It has metal gears which makes it robust and reliable motors. These TowerPro MG995 – Continuous Rotation 360° Metal Gear Servo Motor are the high-speed servo motors with the mighty torque of 9.4 kg/cm. The optimized performance and reliability of … Continued