sensors

APDS-9930 RGB Infrared Gesture Sensor
APDS-9930 RGB Infrared Gesture Sensor
The APDS-9930 sensor is an all-in-one chip, which can measure light, gestures and distance. The distance detection works up to about 100mm, this chip is often used in phones to lock / dim the screen when the phone is held against the ear. Furthermore, the light intensity can be measured and 'calculated' the module gestures such as swiping to the left, right, up and down.
not rated 250.00 + GST Add to basket
37 in 1 sensor kit for arduino
Arduino 37 In 1 Sensor Kit Set
Infrared sensor receiving module.Laser sensor module.Temperature and humidity sensor module.Infrared sensor module.5v relay module.Obstacle avoidance sensor module
not rated 950.00 + GST Add to basket
CJMCU-6701 GSR Skin Sensor Module
CJMCU-6701 GSR Skin Sensor Module

 CJMCU-6701 GSR Skin Sensor Module  The human body, which can be used to measure electrical activity of the skin (EDA), is also known as the skin electrical response (GSR). EDA is actually a characteristic of the human body, leading to … Continued

not rated 750.00 + GST Add to basket
DTMF Module MT8870
DTMF Module MT8870

DTMF Module MT8870 MT8870 module decodes DTMF signals from an audio source and it is suitable for remote monitoring applications, telephone answering machines and more A low power device DTMF decoder chip. It is a complete DTMF receiver integrating both … Continued

not rated 145.00 + GST Add to basket
Dust Smoke Particle Sensor-GP2Y1010AU0F
Dust Smoke Particle Sensor-GP2Y1010AU0F
  1. Power supply voltage: DC5 ± 2V
  2. Operating Current: 20mA (peak)
  3. Sensitivity: 0.5V / (0.1mg / m3)
  4. The minimum detection level of particles: 0.8 m
  5. Clean air voltage: 0.9V typ.
not rated 500.00 + GST Add to basket
GY-213V-SI7021 Si7021 3.3V High Precision Humidity Sensor with I2C Interface For Arduino
GY-213V-SI7021 3.3V High Precision Humidity Sensor with I2C Interface
The module is designed for accurate measurement of humidity and temperature. The sensor is equipped with Si7021 chip with I2C interface, which provides industrial accuracy of measurements. The chip contains an analog-to-digital signal processing converter, calibration data and an I2C interface.
not rated 650.00 + GST Add to basket
Hall Sensor Module
Hall Effect Sensor Switch Module Speed Counting Module

This module can be used to detect the presence of an magnetic field. If there is an magnetic field present, it will report a high level signal. It can be used in many applications such as RPM sensor (for counting … Continued

not rated 90.00 + GST Read more
Inductive Proximity Sensor - Magnetic Switch SN04-N
Inductive Proximity Sensor – Magnetic Switch SN04-N
General purpose inductive proximity sensor switch which can be used for end stop in CNC applications. You can simple avoid mechanical switch.
not rated 200.00 + GST Add to basket
Contactless Temperature Sensor NEW MLX90614 MODULE
Infrared Temperature Sensor Non-Contact GY-906 MLX90614ESF
 MLX90614ESF-is an infrared thermometer for non-contact temperature measurements. It can use with any microcontroller that can communicate with it through it's I2C interface
not rated 720.00 + GST Add to basket
Joystick Break Out Board
Joystick Breakout Board

This Joystick Breakout Board allows you to use a 2-channel joystick with your Arduino. It provides 2 independent potentiometer outputs for X and Y as well as a separate on/off switch activated by pressing the joystick.This breakout board makes it … Continued

not rated 100.00 + GST Add to basket
Linear Magnetic Hall Sensor
Linear Magnetic Hall Sensor
  1. Operating Voltage: 3.3V-5V
  2. Features wide range voltage compactor LM393
  3. Adjustable sensitivity
  4. Signal output indicator with the retaining bolt hole, convenient installation
  5. Output form digital switch output (0 and 1 high and low level)
  6. The output effective signal is low level
  7. When there is sound, outputs low level and the signal light
not rated 120.00 + GST Add to basket
Liquid pH Sensor With BNC PH Electrode Probe For Arduino
Liquid pH Sensor With BNC pH Electrode Probe For Arduino

The electrode is made of a pH glass electrode and a reference electrode combined composite electrode, which is pH meter measuring sensor for measuring the concentration of an aqueous solution of H (pH value), it is widely used in various … Continued

not rated 2,500.00 + GST Add to basket
Magnetic Door Sensor with Screw
Magnetic Door Sensor – End Switch – With Screw

This sensor is essentially a reed switch, encased in a plastic shell. Normally the reed switch is ‘open’ (no connection between the two wires). When the magnet is less than 13mm (0.5″) away, the reed switch closes. They are often … Continued

not rated 80.00 + GST Add to basket
Rotary Angle Sensor CJMCU 103
Rotary Angle Sensor CJMCU 103

Rotary Angle Sensor CJMCU 103 Features: Dust-proof construction protects the interior from dust,which maintains stable characteristics Compliant to high peak temperature lead free soldering Excellent resistance materials and high reliability wiper achieves 1 M cycles D formation thru-hole rotor enables … Continued

not rated 180.00 + GST Add to basket
Rotary Encoder With Push Switch
Rotary Encoder With Push Switch

This Rotary Encoder With Push Switch  can be rotated unlimited times. It has a flat sided shaft and has a built-in push button under the shaft. Flat top Push-button capability Pulses per rotation: 20 Unlimited Rotations Pins are right-angle to … Continued

not rated 80.00 + GST Add to basket
Tilt Sensor Module For Arduino
Tilt Sensor Module For Arduino
This module is compared with the normally open type vibration sensor module, vibration trigger for longer periods of time, can drive the relay module,the company produced normally closed type vibration sensor SW-420
not rated 89.00 + GST Add to basket
Tube Type Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm
Tube Type Inductive Proximity Sensor Detection Switch NPN DC6-36V 4mm
  1. Output Type: NPN-NO
  2. Red LED checks the state of the proximity sensor
  3. High repeated positioning accuracy
  4. High switching frequency
  5. Wide voltage range
  6. Antivibration, dust, water and oil prevention
  7. Reverse power protection, short circuit protection, directly connecting with PLC
  8. Can replace small switches and limit switches
not rated 250.00 + GST Add to basket
Ultraviolet UV Detection Sensor Based On GUVA-S12SD 240NM-370NM
Ultraviolet UV Detection Sensor Based On GUVA-S12SD 240NM-370NM
Can be used in Uv tester, uv watches, outdoor sports equipment, mobile phone, etc
not rated 540.00 + GST Add to basket