1.3 Inch 128×64 OLED Display Module with SPI Serial Interface-7 Pin
1.3 Inch 128×64 OLED Display Module with SPI Serial Interface-7 Pin

1.3 Inch 128×64 OLED Display Module with SPI Serial Interface-7 Pin OLED’s are the future of displays, as they possess some of the greatest advantages over both conventional display technologies of LCD’s and LED‘s. The most attractive thing about using the OLED displays is … Continued

not rated 354.00 Add to basket
10W Stereo bluetooth Amplifier Board 12V-24V Digital Power Amplifier Module XY-P15W
10W/15W/20W Stereo Bluetooth Amplifier Board XY-P15W
  • Bluetooth Power Amplifier Module:
  • Output: Daul Channel
  • Voltage: DC 8V-24V
  • Communication Range: 15m
not rated 649.00 Add to basket
2-channel-PWM-pulse-frequency-adjustable-module-square-wave-rectangular-wave-signal-generator-stepper-motor-drive
2CH. PWM Duty Cycle Square Wave Rectangular Wave Signal Generator
  • Operating Voltage: 5-30V, support micro USB 5.0V power supply
  • Frequency Range: 1Hz-150KHz@2%
  • Signal Load Capacity: output current is within 8–30mA
  • Output Range: default 5V V-pp (can be changed by external power)
not rated 177.00 Add to basket
4 Digit TM1637 Clock Display Module For Arduino
4 Digit TM1637 Clock Display Module For Arduino

This 4 Digit TM1637 Clock Display Module For Arduino is TM1637 Based Serial 8-Digit 7 Segment LED Display Module. Also Called LED Tube Display. It has an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 4 digit 7-segment digital … Continued

not rated 118.00 Add to basket
5V Active Alarm Buzzer Module For Arduino
5V Active Alarm Buzzer Module For Arduino
  • Bring Oscillation Source
  • It and your Arduino or Development board will be able to play melodies.
  • It creates different sound based on different frequency of I/O toggling.
not rated 59.00 Add to basket
AMS1117 3.3V Power Supply Module
AMS1117 3.3V Power Supply Module
  1. Input: DC 4.5V – 12V (input voltage must be more than output voltage (more than 1V))
  2. Output: 3.3V, 800mA (load current cannot exceed 800ma)
  3. Onboard AMS1117 chip.
  4. Onboard power indicator to indicate power is turned on: Red LED.
  5. Small Compact Size, 4Pin Type, Breadboard Friendly.
  6. Dual-panel design, the layout is nice
not rated 47.20 Add to basket
AMS1117 5V Step-Down Power Supply Module
AMS1117 5V Step-Down Power Supply Module
Input: DC 6.5V – 12V (input voltage must be more than output voltage (more than 1V)), Output: 5.0V (+-0.05v error), 800mA (load current cannot exceed 800mA), On-board AMS1117 chip., On-board power indicator to indicate power is turned on: Red LED. Small Compact Size, 4Pin Type, Breadboard Friendly. Dual-panel design, the layout is nice
not rated 47.20 Add to basket
CD74HC4067 High Speed ​​CMOS 16-Channel Analog/Digital Multiplexer Breakout Module
CD74HC4067 ​​High Speed CMOS 16-Channel A/D Multiplexer Breakout Module
2V to 6V operation, “On” resistance: 70 Ohms @ 4.5V, 6ns break-before-make @ 4.5V, Wide operating temperature range: -55C to 125C
not rated 141.60 Add to basket
DC-DC Buck Adjustable Power Module XL4015 5A
DC-DC Buck Adjustable Power Module XL4015 5A
  • Input voltage range:4~38VDC(Note:input voltage not exceeding 38V)
  • Output voltage range:1.25-36VDC adjustable
  • Output current: 0-5A
  • Output power: 75W
not rated 177.00 Add to basket
Digital Thermostat Temperature Control Relay Module-XHW1209
Digital Thermostat Temperature Control Relay Module-XHW1209
  • Programmable mini digital temperature control unit with -50℃ -110℃(-58℉-230℉) measuring range
  • Power consumption: Static current ≤35MA pull current: ≤65MA
  • Display Type: 0.28 inch, three digital
  • Measuring input: NTC (10K0.5%) Waterproof sensor
  • Input power: DC12V
  •  Temperature measurement accuracy: 0.1 ℃
  • Temperature input: NTC (10K 0.5%) waterproof temperature sensor
 
not rated 236.00 Add to basket
FR120N Isolation MOSFET MOS Tube FET Module PWM Relay Switch
FR120N Isolation MOSFET MOS Tube FET Module PWM Relay Switch
  • FR120N Isolation MOSFET MOS Tube : 100V 9.4A
not rated 118.00 Add to basket
IRF520 MOSFET Driver Module For Arduino ARM Raspberry pi
IRF520 MOSFET Driver Module For Arduino ARM Raspberry pi
For Arduino drive up to 24V allows the load, such as LED lights, DC motors, miniature pumps, solenoid valves PWM dimming LED can be used to achieve stepless dimming, variable speed motor
not rated 106.20 Add to basket
Joystick Break Out Board
Joystick Breakout Board

This Joystick Breakout Board allows you to use a 2-channel joystick with your Arduino. It provides 2 independent potentiometer outputs for X and Y as well as a separate on/off switch activated by pressing the joystick.This breakout board makes it … Continued

not rated 118.00 Add to basket
LM358 Gain Amplification Module Operational Amplifier Module
LM358 Gain Amplification Module Operational Amplifier Module

This amplifier module is based on the LM358 operational amplifier which is a high-gain, frequency compensated operational amplifier designed to operate from a single power supply over a wide range of voltages. It is used in conventional operational amplifier circuits … Continued

not rated 118.00 Add to basket
LM386 based 20 Multiplier Gain Audio Amplifier Module
LM386 Based 20 Multiplier Gain Audio Amplifier Module
The LM386 is an audio amplifier designed for use in low voltage consumer applications.
not rated 141.60 Add to basket
MAX3232 RS232 To TTL Converter Module Board
MAX3232 RS232 To TTL Converter Module Board-2pcs.
  • High speed, replaceable MAX232 based. The device fitted supports up to 120kbps
  • Supports microcontroller UARTs – 5V TTL signal levels.
  • Small PCB footprint of 50´40mm
  • Very low power consumption
not rated 59.00 Add to basket
MAX490 RS422 Bidirectional Full Duplex Two-Way TTL Signal Conversion Module
MAX490 RS422 Bidirectional Full Duplex Two-Way TTL Signal Conversion Module

MAX490 RS422 Bidirectional Full Duplex Two-Way TTL Signal Conversion Module RS422 interface, two-way communication. B Y Z A ultra far transmission 1000 meters Module has ESD 15KV protection. On board to increase the limit of 10 ohm current limiting current … Continued

not rated 354.00 Add to basket
MCP2515 CAN Module TJA1050 Receiver
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
This is MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino with this module, you will easy to control any CAN Bus device by SPI interface with your MCU, such as Arduino UNO and Compatible with Arduino based micro-controller projects.
not rated 295.00 Add to basket
MP1584 DC-DC 3A Adjustable Buck module
MP1584 DC-DC 3A Adjustable Buck Module
Input Voltage: 4.5V – 28V ,Output Voltage: 0.8V – 20V, Output Voltage Adjustment: On-board potentiometer, Output Current:  1.8A (typical), 3.0A (max)., Ceramic Capacitor Stable, Internal Soft-Start, Internally Set Current Limit without a Current Sensing Resistor
not rated 100.30 Add to basket
Multi-Function Delay Time Module Switch Control Relay Cycle Timer
Multi-Function Delay Timer Module Switch Control Relay Cycle Timer
  • Operating voltage: 6 - 30V DC
  • 1 Channel delay trigerred relay module
  • Delay time: 0.1 second ~ 999 minutes
  • Seven Segment Display
not rated 259.60 Add to basket