Stepper Motors
Showing 1–20 of 23 results
Various types of Stepper Motors used for Engineering projects & robotic applications

12V Unipolar Stepper Motor (28BYJ-48-12V)

5V Unipolar Stepper Motor (28BYJ-48-5V)
5V Unipolar Stepper motor (28BYJ-48-5V) Unipolar stepper with 0.1″ spaced 5-pin cable connector 8 steps per revolution and 1/64 geared down reduction Holding torque: 2 oz-force*in Shaft: 5mm diameter flattened Diameter: 28mm Voltage: 5V No-load pull into the frequency: >600Hz … Continued

A4988 Stepper Motor Driver With Heatsink
The A4988 stepper motor driver carrier is a breakout board for Allegro’s A4988 micro stepping bipolar stepper motor driver. The driver features adjustable current limiting, over current and over temperature protection, and five different micro step resolutions (down to 1/16-step). … Continued

DRV8825 Stepper Motor Driver With Heatsink
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it … Continued

Easy Driver Stepper Motor Driver A3967
The Easy Driver Stepper Motor Driver A3967 is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). … Continued

MACH3 Interface Board CNC 5 Axis With Optocoupler For Stepper Motor Driver
- Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software.
- USB power supply and peripherals power phase are separate to protect computer security.
- All the signals are to-isolate which can protect your computer security.
- 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc.
- Wide input voltage range: 12-24V, and with anti-reverse function.
- One relay output control interface, accessed by the spindle motor or the air pump, water pump, etc.

Nema 17 4.2 Kg-cm Bipolar Stepper Motor CNC Robotics 3D Printer
The Nema 17 4.2 Kg-cm Bipolar Stepper Motor CNC Robotics 3D Printer is a stock motor that has a 5mm diameter shaft. It’s also great for all kinds of mechanical projects, robotics, and projects. It’s fully compatible with the Generation … Continued

NEMA 23 10.1kg-cm Hybrid Stepper Motor
- Step Angle Step Angle: 1.8 °
- Current: 2.8 A/Phase
- Holding Torque: 101 N-cm
- Detente torque: 3.6 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 6.35 mm

NEMA17 – KS42STH34-1504A Stepper Motor – 1.5A – 34mm

NEMA17 – KS42STH40-1204A Stepper Motor – 1.2A – 40mm

NEMA17 Stepper Motor 3KGCM With Pulley For 3D Printer
NEMA17 Stepper Motor 3KGCM With Pulley For 3D Printer is Ideal motor for 3D Printer. Standard NEMA 17 Frame size. 3kgcm with 2mm Pulley. Features: Stepper motor with 2mm pulley attached to shaft compatible with GT2 timing belt Step Angle … Continued

Nema17 Stepper Motor Right Angle Mounting Bracket
- Most accurate design for NEMA17 Stepper Motor
- Mounting Holes Size: 4mm
- Equips extra holes for user-defined motor fitting.

NEMA17 Stepper Motor-48mm – KS42STH48-1684A

NEMA23 18.9kg-cm Hybrid Stepper Motor – D-Type Shaft
- Step Angle Step Angle: 1.8 °
- Current: 2.8 A/Phase
- Holding Torque: 189 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 6.35 mm

NEMA23 30.61Kg-cm Hybrid Stepper Motor D-Type Shaft
- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Motor Typr: Bipolar
- Holding Torque: 306 N-cm
- Detent torque: 6.8 N.cm (Maximum)
- Lead Wires: 4
- Shaft diameter: 8 mm

NEMA23 7.2kg-cm Dual Shaft Hybrid Stepper Motor

Nema23 Stepper Motor Right Angle Mounting Bracket/Clamp
- Most accurate design for NEMA23 Stepper Motor
- Mounting Holes Size: 5mm
- Equips extra holes for user-defined motor fitting.

NEMA34 46kg-cm Hybrid Stepper Motor
- Step Angle Step Angle: 1.8 °
- Current: 4 A/Phase
- Lead Wires: 4
- Shaft diameter: 14 mm
- Shaft Length : 32mm

NEMA34 87kg-cm Hybrid Stepper Motor
- Step Angle Step Angle: 1.8 °
- Current: 5 A/Phase
- Holding Torque: 870 N-cm
- Lead Wires: 4
- Shaft diameter: 14 mm
