16-CH. 12-bit PWM/Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi
16-CH. 12-bit PWM/Servo Driver-I2C-PCA9685 for Arduino-Raspberry Pi
This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers.Terminal block for power input (or you can use the 0.1" breakouts on the side).Reverse polarity protection on the terminal block input.3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1" so you can only stack 4 next to each other on 0.1" header
not rated 400.00 + GST Add to basket
A4988 Stepper Driver With Heatsink
A4988 Stepper Driver With Heatsink

This A4988 Stepper Driver With Heatsink is used to control stepper for various electronic project. A4988 IC can drive 2A per phrase of the stepper Simple step and direction control interface Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and … Continued

not rated 120.00 + GST Add to basket
DRV8825 Stepper Motor Driver With Heatsink
DRV8825 Stepper Motor Driver With Heatsink

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it … Continued

not rated 150.00 + GST Add to basket
EasyDriver Stepper Motor Driver A3967
Easy Driver Stepper Motor Driver A3967

The EasyDriver Stepper Motor Driver A3967 is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The … Continued

not rated 220.00 + GST Add to basket
L293D motor driver board
L293D motor driver board

This module is a medium power motor driver perfect for driving DC motors and Stepper motors. It uses the popular L293D H-bridge motor driver IC. It can drive 4 DC motors in one direction, or drive 2 DC motors in … Continued

not rated 99.00 + GST Add to basket
L298 motor driver board
L298 Motor Driver Board

This L298 46V, 2A Stepper Motor / Dual DC Motor Driver module can drive bipolar stepper motor or Two DC motors at the same time. Each L298 has two H-Bridges. Each H-Bridge can supply 2Amp. current. L298 has heat sink … Continued

not rated 149.00 + GST Add to basket
PWM DC Motor Speed Controller Module 6V-12V-24V-28V 3A 1203B
PWM DC Motor Speed Controller Module 6V/12V/24V/28V 3A 1203B

PWM DC Motor Speed Controller   Module 6V/12V/24V/28V 3A  Feature: Voltage range: DC6V-28V Current range: Within 3A Switch function: None Speed range: 0-100% Size: 32 x 50 x 15mm

not rated 280.00 + GST Add to basket
PWM DC Motor Speed Controller 12V-40V 10A
PWM DC Motor Speed Controller 12V-40V 10A

Control the speed of a DC motor with this controller. High efficiency, high torque, low heat generating. With reverse polarity protection, high current protection. Working Voltage: DC 12V – DC 40V. Control Power:0.01 – 400W. Static Current:0.02 A ( Standby … Continued

not rated 460.00 + GST Read more
TB6600 4.5A CNC Single-Axis Stepper Motor Driver Board Controller
TB6600 4.5A CNC Single-Axis Stepper Motor Driver Board Controller
Toshiba's new high current, high voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short-circuit protection and increased compared to TB6560.
not rated 680.00 + GST Add to basket
ULN2003 Stepper motor driver
ULN2003 Stepper motor driver

  Use ULN2003 driver chip, 500mA  A. B. C. D LED indicating the four phase stepper motor working condition.  White jack is the four phase stepper motor standard jack.  Power pins are separated  We kept the rest pins of the … Continued

not rated 99.00 + GST Add to basket